Own an LG TV or webOS device? Join our Forum!
Register now to gain access to our webOS user support forum. Once registered and logged in, you will be able to post a user to user support request topic to this site or reply to existing topics posted by other users. You can also take part in our other webOS user forums. You'll be able to customize your profile, receive reputation points, while also communicating with other members via your own private inbox, plus much more!
By John Bizeray
I recently updated the firmware on my LG43UH610V. Now I constantly get "Wired Lan cable disconnected" / "Wired network is connected" messages even while watching a video file from my NAS. The TV is connected and using the network while getting these messages. It has always been on a fixed IP address on the LAN.
Initially would search and find 3 networks (Testra Air, the correct one and one other??) but would not connect.
Reset our router (turn off then turned on again and waited) but now no networks are even found to attempt to connect to.
Any suggestions what my next step should be? This has happened suddenly. Thanks
I'm new here hoping to find a solution to my problem, after now trying around for almost two days without any result.
- LG OLED55C97LA OLED TV
- Nubert nuPro X-3000 (Pair of active speakers)
The active speakers are connected to the TV via HDMI-ARC on both sides. I'm aware that my configuration might be a bit unique, however I have the feeling that it is the TV / webOS which is messing arround with me.
After connecting my speakers to the HDMI-ARC, changing the TVs output to the HDMI 2 (ARC) is started the device configuration. I was glad, as typing in "Nubert" into the device selection of both "Home cinema system" or "Bluetooth / Soundbar", the webOS brought up a configuration to select.
During the "try-out" phase of the configuration process, turn on and off the power of the speakers works perfectly - even very fast! After configuration, sound comes through the speakers very well and I can adjust the volume. However, when I turn of the TV the speakers will remain on. Same vice versa when trying to turn everything on by only starting the TV.
Does anyone face a similar problem and might have a workaround for this? It is very frustrating and annoying, as it works perfectly in the configuration - but not later on.
Thanks for your help!