Quantcast
Jump to content

Follow along to stay updated on LG's latest launches!
  • 0

Roku+ disconnects - no signal

dwsteele41

Asked by dwsteele41,

 Share

Question

4 answers to this question

Recommended Posts

  • 0
George Hofmeister Mentor

George Hofmeister

Posted
Posted
2 hours ago, dwsteele41 said:

Roku stick + will work through the menu choice, but when any app content starts to stream, I get a "no signal detected" message. Any ideas?

Is this a new device?  Have you tried it on a different HDMI port?  Are you able to test the Roku on a different TV?

  • 0
dwsteele41 Rookie

dwsteele41

Posted
  • Author
Posted

This Roku stick used to work on the LG, but stopped.  I've tried it on all of the different 65C7p HDMI ports.  I've tried another Roku Ultra and gotten the same issue.  I've tried both the stick & Ultra on an older LG OLED and they seem to work.  I 'think' I've narrowed it down to the latest FW on either the Roku(s) and/or the C7p.

  • Like 1
  • 0
George Hofmeister Mentor

George Hofmeister

Posted
Posted
17 hours ago, dwsteele41 said:

This Roku stick used to work on the LG, but stopped.  I've tried it on all of the different 65C7p HDMI ports.  I've tried another Roku Ultra and gotten the same issue.  I've tried both the stick & Ultra on an older LG OLED and they seem to work.  I 'think' I've narrowed it down to the latest FW on either the Roku(s) and/or the C7p.

Hi,

Thanks for the feedback, I noticed that when my Roku 3 updated recently that the YouTube app has become much slower to start.  Sadly that is the thing about tech devices we all expect them to be inter-compatible but there are always issues.

  • 0
dwsteele41 Rookie

dwsteele41

Posted
  • Author
Posted

Might be similar, that was about the same time for me.  I have noticed some 'screen flashes', leading me to wonder if it might be a 'renegotiation issue' in terms of matching resolution & characteristics of the content with the LG WebOS processing.  A mis-match in incoming content type could result in slower processing/display as well as a 'black stream'

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing


  • Popular Now

  • Similar Topics

    • Stylianos
      HDMI Inputs black screen signal loss temporarily
      By Stylianos
      i am having an issue with my LG OLED77C2 tv that started happening (i believe) once i have updated from web24 to 25. It seems like whenever the tv is displaying a source from any of my four HDMI inputs, while i am watching the screen goes black randomly for a few seconds and it loses audio as well during the black screen. Once this happens the audio usually comes back as soon as the image does, however not always. The audio might dissapear completely. In order to fix that i might need to power cycle the tv or unplug the hdmi input out, wait a little and then plug back in. Moreover, sometimes when the black screen flash happens it cripples most of my native apps on the tv. So if i switch to netflix or youtube right after the black screen flash, both apps populate normally all the video/film options in the main menu but when i try to actually play any of the video/films, they dont play and it is throwing an error. These black flashes never happen when i am watching netflix or youtube. Only when using my hdmi inputs. ive changed brand new high quality cables but that did not fix my issue. For the xbox i was already suing an ultra hish speed 2.1 hdmi cable but ive re placed that as well with a brand new one. ive also changed the tvs main board to a brand new and it still happening. Once the dealer changed the board, the tv was behaving normally without the issue. However after a few days i updated the tv to the latest firmware and this started happening. what do i do? 
      FYI: I tried EVERY SINGLE option to troubleshoot the issue. Disabled VRR, AMD Freesync, ALLM, HDMI Deep Colour, SIMPLINK, I basically set my tv to display video and audio in the most archaic way just to troubleshoot. Still doing it. I am using an xbox series x on input 1 and a mag520 box on input 3. Does it on both sources. Moreover, in case this helps whenever this happens while on the xbox the Dolby vision/HDR logo appears on the top right right after the video comes back once the black screen is over depending on what settings i have the xbox on. Also swapped to different inputs. Still doing it
    • andreluigo
      UM7500 4K not showing HDMI signal from PC/Notebook
      By andreluigo
      I used to extend my screen from PC/Notebook to my TV but i stayed a long period without do it.
      It happens that since a few days ago i am needing it and for my surprise is not working anymore. Tried other cables, updated the drivers and O.S. but nothing worked. So i decided test at the room's TV (LG as well) and worked perfetcly.
      I looked for all internet and youtube for similar issues and a solution but couldn't find it, until i receive my weekly mail from this forum and remembered it.
      I am suspicious that was one of the several updates since i extended for the last time that made this!
      So, does anybody could help me, please?
       
      Thanks in advance!
    • Marco Coletti
      How to show the HDMI input signal frame rate?
      By Marco Coletti
      See topic title.  I have an Android box connected to HDMI 1 and would like to check if it auto switches frame rate according to the current video file.
      Is there any "secret code"?
      OLED48CX3LB with webOS 5.4.3-36 fw 04.41.45
    • haptrail
      Roku "1-touch play" (HDMI input switching) not working with LG C2 TV
      By haptrail
      I have an LG C2 Web OS TV and a Roku Ultra Model 4670RW.  The Roku comes with an option called "1-touch play" which allows you to switch the TV from between devices connected to other HDMI 2.1 inputs.  I have a Roku in one input, a DVD player in another, and a Directv Streaming box in another.  With this same setup on a Vizio V435-H11 TV, I am able to press the home/play buttons on the Roku remote and no matter which input I'm watching, it will switch to the Roku.  Same with pressing remote buttons on the DVD player and Directv remotes - the TV will switch to that device.  But with the LG C2 TV, none of the switching takes place when pressing the same buttons on the remotes for the other devices.   I have enabled the "1-touch play" on the Roku remote (settings/system/control other devices/1-touch play), and I have enabled the IR Setup (settings/Remotes & Devices/Remotes/Enhanced Voice Remote/Setup Remote for TV Control/IR setup).  I cannot enable the CEC setup on the Roku Remote, but that doesn't affect the 1-touch play switching function on the Vizio TV so I don't think that plays into the limitation on the LG C2.  I have also enabled the CEC (Simplink) function on the LG C2 (General/Devices/HDMI Settings/Simplink (HDMI-CEC)).   I've read some solutions online and have done a system restart on the Roku as well as disconnecting all devices from power, disconnecting all the HDMI cables, waiting 5 minutes, and reconnecting all.  I am using all new 2.1 HDMI compatible cables.  Any body else having this problem with using a Roku Ultra and an LG C2 TV and found a solution?   Thanks!
    • M55
      Simultaneous Signal Outputs through HDMI eArc and Optical ports?
      By M55
      I am trying to setup my new Phonak my hearing aids TV Connector with my new LG GP2 TV and Sonos Arc sound bar, connected by via the HDMI eArc port.   The TV automatically uses the the HDMI eArc port, and that port only.  As a result no signal goes through the optical out port of the LG TV.
      Is there a way to make the LG TV sound signal simultaneously go out to both the sonud bar via eArc port and to the Phak TV Connector via the optical out port so that I can connect hearing aids to the Phonak TV connector and also use the Sonos Arc soundbar at the same time?
      Appreciate any guidance.
      Thanks, M55

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...