Hi, I'm curious if anyone else is seeing this annoying new behaviour.
I have my SKY Q box on HDMI1 and have become accustomed to switching back from Netflix (or any other app for that matter) by having HDMI1 assigned to button "1" using the Quick Access feature. In the last week though, this feature has stopped working properly. If I am in Netflix and I press the "1" button, nothing happens (as expected). If instead I hold down the "1" button to switch to SKY I get a pop up that says this: "Do you want to add Netflix to [Quick Access 1]?". If I then hold down the "0" button, the 3x3 grid "EDIT QUICK ACCESS" pop-up appears and I can clearly see my SKY Q/HDMI 1 in the top left grid position (button "1")!!!
If I then switch via the Home button to HDMI1 and remove HDMI1 from Quick Access (via the EDIT QUICK ACCESS pop up), I can then re-add it by holding down 1 or from within the pop-up. Now, if I go into Netflix and then hold down 1, my TV does (correctly) switch to HDMI1. Hurrah! If however I turn my TV off and back on, then go to Netflix, then hold down "1", I am back to square one with the question "Do you want to add Netwflix to [Quick Access 1]?"......Grrrr!!!
I have tried switching the TV off at the wall, leaving for 10 seconds and repowering, which doesn't fix the problem (I don't believe WebOS reboots when you do this). LG appear to have made it a practical impossibility to reboot WebOS via anything other than a factory reset which I don't really want to do as it'll take me too long to get all my settings back to where I have them now. Some blogs suggest that the "User Licence agreement" setting can be changed which forces a reset from within the General tab but I don't see this on my TV (guessing that WebOS interface has changed).
Anyone have any ideas?
By Rex G
It starts ok but when I select a program it just sits there with the 'wheel' turning. It works ok on my phone and ipad. Have tried updating tv operating system and iview app but they seem to be at the latest version. Anyone else having problems?
Is anyone aware of an update to the lg web browser that will enable me to screen mirror using an iOS device. I do not have that capability at the moment
Hello, the wifi of my smart TV is broken since the last update.
The remote control from my phone too when i use an opérational ethernet connection.
Full setting reset
After the power reset and unplugged during at least 10 min, the WiFi networks was at new listed but impossible to connect, it says WiFi network not found.
After a new power off, the searching of wifi networks didn't end without result.
The remote control also lag a lot each 10 seconds and during 3 or 4 seconds.
TV Informations :
Model : 49SJ800V-ZB
Devide Name : [LG] webOS TV SJ800V
Serial Number : 711MAVDM8903
webOS TV Version : 3.9.0-62709 (dreadlocks2-dudhwa)
MAC Wired : 38:8C:50:F3:2B:5D
MAC Wireless : 7C:1C:4E:A0:E8:C7
ESN : LGTV20171=11002626448
VSN : 5DBF066A
Widevine : LGTV17CLGE005126094
Is there a way to downgrade by putting the firmware on a USB Key with a FAT 32 filesystem on to be sure it could be read by the TV ?
Thank you in advance for your help.