Quantcast
Jump to content

Recommended Posts

Posted

I have several lg tv’s of the non smart type. Setting the recording time from the TV guide is simple. However on Webos it is extremely complex.

Let me explain.

Where I live, programs always finish beyond their scheduled time. On the non smart tv it is easy to add an extra fifteen minutes to the time while defining it. On webos you need to first define it and then go to a different application in order to edit it! It makes recording from the schedule just too complex for most users.

Please,please fix this in an update.

 

  • 3 years later...
Posted

Ok so I also have the same issue. It makes scheduled recordings almost useless. How incredibly frustrating to miss the last 2 mins of all my shows. Usually the most important part. 
 

I fortunately found you can go in and edit the end time. But it would be sooo much easier if you could just set a single setting to extend all recordings. This seems an essential setting for any recording scheduler. It’s almost like the Webos creators haven’t used this feature!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Deb D
      just bought a LG OLED AI B5 4K Smart TV 2025 -  but cannot see how to pause live TV - have correct USB  memory  plugged in and it records programmes fine but when we try live recording  .. Help!     it says the memory is incompatible
    • By la Siesta
      Summer time not changed on my LG smart TV ???
    • By Pranay Mokida
      Issue
      Whenever I start any video—whether it’s streaming apps, HDMI input, or a USB movie—the SC9S plays for a minute or two, then suddenly loses connection. Audio instantly falls back to the TV’s internal speakers, and the TV acts like the soundbar no longer exists on the eARC port. The soundbar display still shows “eARC” (sometimes flips to “OPT/ARC” for a second), but no sound.
      Temporary Fix
      The only thing that gets audio back is power-cycling the TV (standby isn’t enough; full reboot required). After that, the bar reconnects… until the next random dropout. This can happen multiple times during a single movie, which is a great way to kill the vibe.
      What I’ve Tried
      New HDMI 2.1-certified cable (same result, so original cable seems fine).
      Disabled Quick Start+ and Simplink in the TV settings, then re-enabled.
      Factory-reset both TV and soundbar.
      Tested ARC instead of eARC—works, but no Atmos and same occasional dropout.
      Plugged the soundbar into a different power outlet (in case of power spike).
      Observed Patterns
      Dropouts happen sooner with Dolby Atmos or DTS content, but even stereo YouTube videos eventually cut out.
      No obvious heat buildup; bar is in open air, front facing.
      Happens whether soundbar is wall-mounted or on its stand.
      Questions for the Hive Mind
      Anyone else seeing eARC instability with the SC9S on the UP77 series?
      Could this be a handshake timing bug on the TV’s HDMI board?
      Any hidden service-menu tweaks or firmware betas worth trying?
      Should I just RMA the bar, or is the TV the real diva here?
      Appreciate any insight—my couch and I thank you in advance!
    • By Hblone
      Hallo, I bought a 55un74006LB smart tv in Italy. It seems not to have usb recording capabilities, according to the information on the italian website, but the UK site declare it has. I think it's the same product with the same functions, so how can I turn the live tv and usb recording on? I think I found the options in the service menu but I cannot change the values. Any suggestion?
    • By JasonB
      Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!

×
×
  • Create New...