- 0
Connect external drive to TV over network
-
Popular Now
-
Similar Topics
-
By John Bizeray
I recently updated the firmware on my LG43UH610V. Now I constantly get "Wired Lan cable disconnected" / "Wired network is connected" messages even while watching a video file from my NAS. The TV is connected and using the network while getting these messages. It has always been on a fixed IP address on the LAN.
-
By stevef
Since my lg-oled65c9pla auto-updated to WebOS 5.5, there is a new bug.
The TV is connected to my Cambridge Audio Evo 75 amplifier over ARC - on powering the TV, it has always started up the amp, and switched it to use audio, instead of the appalling TV speakers. The whole setup has worked flawlessly for 5 years, but since WebOS 5.5, the amplifier starts, but is left in a muted state, and using the un-mute or volume controls on the TV remote makes no difference to turning on audio. The only way to get audio to play though my amp a speakers is to turn the amp's volume dial or press a volume button on the a amp's remote - this then unmutes the TV and audio is back.
There is no setting I can find in the TV that relates to whether the ARC channel starts muted or not...
No software has changed in my amp. This is an annoying new bug in the TV software, I assume down to some CEC changes.
-
By Fredrik Andersson
Hi,
I have a OLED77C34LA and a pair Bose QC32 II headphones and I have trouble connecting to the tv.
First the headphones works good on my other three devices but the TV has trouble, when I manage to connect they work perfect but when I turn the off on on again the headphones will say they are connected to the TV but the TV most of the time won't give me an option to connect and I remember I got a popup asking if I wanted the use the headphones as output but only for like 3-4 times so far.
Usually I have to plug the power out of the TV for a while and remove the bluetooth device but and it doesn't always work. It's not great spending like 15min to get the headphones to work.
Any ideas what could be wrong?
-
By Charley
On my LG 'smart' TV now for some reason I can now only watch the LG channels but not the fiber-optic programming on wi-fi . The HDMI 1 feed I normally use shows 'dark' on the Dashboard even though I can get the green checkmark on it. How do I reconnect it? The Dashboard shows my feed as ethernet/cable; which is wrong but efforts to correct it have failed so far.
Chemicals Industry -
By Andy_Roider
As per the subject line, I have had a USB drive connected to my television for over four years, but for the past few days it has not been recognising the directories where my films and music are organised, and is displaying EVERYTHING in a single list of over a thousand files.
It is a 1TB drive (half of the maximum 2TB allowed) with a power supply, formatted as NTFS, and not completely full.
I have checked the drive and it has no bad sectors. I have tried connecting it to both USB ports and all the files are in the permitted format (avi, mkv, mp4, mp3, etc.).
I have also tried another 1TB drive, but the result is the same.
Do I need to reconfigure something in the television settings?
It would be a significant loss if I cannot resolve this issue.
Thank you in advance for your responses.
-
Question
Rukmaj Chandavar
Hi All,
I recently bought a LG Smart TV with WebOS (42LB6500) and would like to connect to my external hard disk connected over network. Here is how my home network and devices are setup.
Any help in this regard would be greatly appreciated.
Regards,
Rukmaj
11 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.