By Justin Tan
Found multiplex application that use letsencrypt stop working in 30 September 2021 on LG WebOS 3.5. This appear to be wide spread multiplex version of WEBOS.
link hidden, please login to view As PLEX blaming to be LG fault. LG please provide solution to only 2 year old TV
Our current app is available on 4K/UHD LG television models running the following system software:
webOS 3.0 webOS 3.5 webOS 4.0 webOS 5.0 No 720p or 1080p (“full HD”) sets are supported for our current app at this time.
Note: Due to root certificate limitations with the device OS itself, only webOS 5.0+ devices support secure connections with a personal Plex Media Server. To allow connections to a personal server, devices running earlier webOS versions must be set to Allow Insecure Connections in the TV app settings and the Plex Media Server must be set to Preferred for the Secure Connections preference.
I've just got a 55NANO80 TV and tried to set it up today.
I got through the set up as far as connecting via satellite, cable or aerial. This stumped me because I don't have any of these, as far as I know! I just have NOW TV. So, I pressed exit, thinking that the TV would skip trying to search for channels. The screen then flashed with vertical black and white lines and then went completely black.
I have tried to reset the TV and turn it off and back on. Nothing shows on the screen, so I cannot press the settings button or anything.
Have I been sent a dud TV or have I missed something really obvious? Any advice would be greatly appreciated.
Edit: I have turned Now TV on and the sound is coming through the television, but I still have no picture.
I am trying to sign into my LG account on my LG C1 OLED TV. The page will not load. All I get is a constant revolving circle. Please help.
LG OLED C8 TV with Soundbar connected to HDMI ARC port the Volume Control Percentage missing just + & - controlBy Jim Brown
I have a LG OLED C8 TV with a Soundbar and when connected to Optical the Volume Control is normal with a Percentage 0% to 100% but when connecting to HDMI ARC port like the Soundbar suggest to be connected it just show + or -, you don't have anyway of knowing what the volume is set to. I have tried two Soundbars a LG LAS551H that was connected via Optical and when connected to HDMI ARC it also does not show Volume Control. I have got a new Sonos Beam Gen 2 that is now connected to HDMI ARC port and sounds great but if I connect it to Optical it's much lower in volume but has the Volume indicator. Please advice.
I would like to suggest three enhancement request: 1. to show Volume Percentage on the HDMI ARC port. 2. Optical and HDMI ARC have the same output and 3. the Sonos be added to the Device list under Soundbars.
Similar Tagged Content