Hi, I have a feature request for the sound out setting. I often connect my Bluetooth headphones to the TV. We don't use the internal speaker of the TV, we use the optical sound out setting whenever I don't use Bluetooth. It would make our lives a lot easier if the TV can remember the last sound out setting before connecting to Bluetooth and default back to this setting when the Bluetooth device gets disconnected. At the moment, each time I disconnect the headphones I have to go back into settings and change the sound out setting from internal speaker to optical again.
Thanks and regards
I am not able to force my new TV LG 49UN7400 to sound output only for BT - not BT headphones + internal speakers. Headphones are correctly paired, because "headphones + internal speakers" works, but I want hear sound ONLY in headphones and the choice "Bluetooth" is not active/selectable... 😕 Any suggestions? Thanks in advance.
I have set up a hard disc, that I can see in the home menu, but when I go to the guide and select the "i" it only gives me the option to watch. I am very new to smart television and I can't figure out how to correct this problem.
Hi to all!
I'm really new into this and have a problem. My 2018 LG 55UJ635V-ZF has only webOS 3 (latest; ethernet-automatic download) an i can't use airplay or miracast. The apps i found in the store for mirroring are only pay2use to use this needed feature for me.
On the LG Homepage i can't find an upgrade for my TV an maybe is my tv really to old for upgrades or am i wrong?
Maybe someone can help me out or bring some light for me in this.
I also found the suggestions on this site for the firmware 4.70.70 (for the UJ's), but i can't download....error.
sorry for my bad english 🙂
thx for your help, quartex.
LG C2 Oled Connected to Samsung HW-Q800B Soundbar: Sound delays to respond during movie pause/unpause on TV streaming Apps like Netflix and Prime Video when sound output is set to PassthroughBy GiotisCy
I have recently purchased an LG C2 Oled TV which I connected with my Samsung HW-Q800B 5.1 soundbar via eArc HDMI. When I select "Passthrough" as a Digital Sound Output on LG TV sound advanced settings, there is an obvious sound response delay around 3 seconds when I pause and unpause the movie on Netflix or Prime video streaming apps on LG TV. For example, when I start the movie, the video starts and sound starts 2-3 secs later. When I pause the movie, the sound continues for 2-3 secs after the video has been stopped. There is no any lip sync issue, just this response delay of the sound from the soundbar. This happens only on LG TV Apps. If I connect to an external HDMI device such as AMAZON Fire Stick 4K, there is no such sound delay issue neither on Netflix neither on Prime Video.
Thus, the problem seems to be on LG TV apps.
If I change the Digital Sound Output to "Auto" instead of "Passthrough" the issue is gone but sound quality is not as good as with Passthrough selected. So I do not want this to be my option.
I would appreciate if someone could come with a solution on this.