- 0
-
Popular Now
-
-
Similar Topics
-
By ALIENQuake
If I play an MKV video from a USB drive that contains multiple subtitle tracks with correct language tags, will webOS automatically select the appropriate subtitles, for example based on the TV interface language or the country where the TV is being used? Or it will just select first one/makred as fefault?
-
By MNW
I've had Universal Control via the smart remote sucessfully controlling the audio (volume) for my LG OLED 48C1LB tv via my Sherwood RD-6118R amp for a while now; But following a power cut, the remote no longer controls the amp/tv volume?
The audio IS still being played through the amp using the optical OUT/IN but I have no control of the volume
I've removed and re-initialised the settings for this amp in Universal Control Settings but following the "success" message, the remote does not control the volume on the amp/tv.
What am I missing?
-
By John Peet
TV is a week old and the internal speaker has stopped working when in HDMI ARC + internal speaker sound output mode. The internal speaker itself works fine when in “internal speaker” sound output mode. I’ve checked all the settings that I can and can’t find anything that would correct this issue.
-
By Regis Wheeler
Apparently, the LG model OLED55CSPUA has an issue with the external device power on/off control. I can configure the IR Bose soundbar well enough, as setup sequence tests it good to control soundbar power. but after exiting the setup, when i press the external device power button on the remote, the TV just wants to cycle through the setup again. It doesn't toggle soundbar power, just cycles back to the setup. i have tried factory settings reset and verified that there are no other devices on the TV.
-
By ato53
Hello,
I have a new C4 TV.
Here is the problem I am facing, as well as a suggestion for improvement.
When you have an acoustic deficiency, it is much easier to use a headset (via bluetooth).
But the only current option is to switch the sound to the internal speakers when you activate the bluetooth.
It is still a shame to penalize other people who watch TV by no longer allowing the use of a good sound installation that you have (sound bar, ...) because a person needs an acoustic aid.
Would it be possible to add this combination (optical output + bluetooth) to satisfy everyone?
I add that I tried to place an optical splitter to combine the 2, however, there is a bug apparently because as soon as you turn off the headset, there is a white rectangle which probably indicates an error that appears very briefly but every few seconds, which makes TV viewing impossible.
Thanks for the follow-up
-
Question
maninblack2000
I have a 55" Tv and a LG soundbar, i have put the soundbar behind where I sit, basically so my TV doesnt have to be up so loud. Its connected with a optical cable. I changed the sound setting on the TV so the sound output is 'Internal speaker audio output (optical) This works perfectly for an hour or so but then it develops a faint echo effect? If i change the setting to just internal or one of the other settings, then change it back, its fine again for a while, but then the echo comes back? Anyone know why this is?
I have tried every setting i can find but it still happens?
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.