- 0
-
Similar Topics
-
-
By solidblue
My TV has stopped recognising the live TV signal from the aerial since the OS updated recently. The aerial works fine when plugged into other devices but when plugged into the TV it doesn’t recognise the signal for days on end. When this happens, it will no longer allow me to do a signal test via the settings (the option is greyed out). I’m guessing it’s either a) a problem with the input (hardware) or; b) a problem with the OS (software).
-
By Kingfamily
My remote and tv were working perfectly fine until my power button wouldn’t turn my tv off. Every other button worked except the power button so I changed the batteries and nothing changed. So then I pressed the home and back button thing and it de-registered my remote. So when I press ok to re-register my remote nothing was working on the remote at all. The power light still turns on with every button I press but will not connect back to the tv. So I then download the thinkQ app and oroceed to reset my tv. Which was probably the worst mistake I could make because now my tv is stuck on “press the ok(wheel) button on your remote” and cannot detect the remote what so ever. I keep calling customer care but they keep telling me to buy a new remote which I don’t think is the problem since it works on my other lg tvs in the home. I’m stuck with a tv that won’t display anything but press ok(wheel) button on your remote.
-
By dennis101
Just purchased this and the set up is driving me nuts. I have a Sony reciever that I use for my audio out as well as HDMI device switching. The output of the reciever is going to HDMI 1. The TV audio out is set to HDMI (ARC) device. When watching devices directly connected to the reciever (cable box, roku, DVD, Tivo), audio out is fine. If I try switching to the smart menu or the antenna, there is no audio going from the TV back to the reciever. I also have a Roku I can use for streaming, but not for OTA. Should I just route everything directly into the TV, and use the optical out to get sound to the reciever? Also since setting up the TV and remote there is strange interaction btween the TV and the reciever. I noticed that my cable box, dvd, and roku all show up devices attached to HDMI 1, and clicking on that device will change the input on the reciever, but I have no control over the reciever from the LG remote, volume and muting buttons have no effect. Also there soesn't seem to be anyway to control my Fios cable box, a Motorola HD QIp 7100-1. I have the IR blaster sitting right next to it
-
By Fausto
I aIl
I cannot receive Rai1 4k fifa game,
The message sayd It Is supported only from version 2.0.1.
How can I check my installed version?
I have received Hbbtv Channel until a few days ago
Let me know
Fausto
-
-
Question
UptwoCamp
We have tried to update certain apps installed on an LG webOSTV UH6090 as ribbon bar has suggested. We have gotten updates on the TV successfully, rebooted the TV, as well as double checked all settings, zones excetra. When we are try to update them, we toggle to the update, press OK, and both the update and cancel button illuminate, then the TV goes back to full picture and no update. Called technical service, no results.
Has anyone else had this issue? How did you resolve?
Link to comment
Share on other sites
Top Posters For This Question
1
Popular Days
Dec 19
1
Top Posters For This Question
UptwoCamp 1 post
Popular Days
Dec 19 2020
1 post
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.