Quantcast
Jump to content

  • 0

Cannot reset Parental Control Pin


Momz

Question

I have contacted LG to see if I could reset the pin code. It was changed from the default over a year ago. I’m in the states, so the instruction included the channel up and down buttons on the remote. 

We tried the following:

1) Channel up, channel up, channel down, channel up

*the idea is to have a master pin code box open enter a code  (Didn’t work. No box opened)

2) Tried all of the following codes:

0000, 7777, 0313, 0323, 0325

(None worked)

Any other suggestions would be appreciated.

The model is 55UV8500 (2014)

The software version is 05.05.45

 

Edited by Momz
Adding model number and software information
Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 1

Spent another 45 minutes on with Lg rep. 

Finally reset. 

Steps are:

1) Power off TV. 

2) Unplug the TV. 

3)Hold the power button for 10’seconds. 

4)Plug in the Tv. 

5) Power on the Tv. 

6) Access the Safety option via the cog (Cog-(or home button)-Advanced options-Safety

7) Select the Reset PIN Code option. 

8)Enter Pin Code. Any numbers will work. 

9) After the Pin Mismatch error message, press the Channel Up, Channel Up, Channel Down, Channel Up. 

10) The Master Pin Code box should appear. Enter your master code ( It may be 0313, 0325, 0323, 0000, 1234,7777 depending on your Tv model. It is best to call LG to determine the correct code)

11) Change your PIN code.( Preferably to 0000 because who wants to go thru this ever again???!!!???)

Hope this helps. 

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Stephen Davies
      As above! All4 & My5 will no longer work. Also, how do you update the browser? My LG nano TV is just over 3 years old.
    • By matesz
      Hi
      I have LG C3 connected to yamaha A-S501 via optical cable.
       
      When i pair the devices with universal control both power and volume features works as intended.
      After pairing i cannot turn on or off connected device, but volume works.
       
      It's like option to send power signal via IR is turned off and i cannot find option in settings to change it.
       
      Please help, i just replaced AMP explicitly to have this feature
    • By matesz
      Hi
      I currently have CA DacMagic 100 connected via optical + CA A1 AMP, this is quite cumbersome and doesn't work with universal control.
      I know that i will have to buy some hardware to have proper universal control, however i can't find any reliable information on which amp does support it and which doesn't. 
       
      It would be great if list of supported devices would be available.
      If not then recomendation for AMPs that works well with optical + simple DALI oberon stereo satellite setup is also solution.
       
      PS1. Sorry if this duplicate but i couldn't find anything meaningful after few days of googling.
      PS2. I've heard that Denon AVR-X3600H works but this is massive overkill for what i need (i don't indend to go beyond stereo, not even 2+1).
    • By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • By Smartboy
      Hi all, I am trying to find a solution to the native but complex "magic" remote control from LG. For elder or young people, this magic remote control with the OLED C3 TV is too complex or too busy (using a lot of unused keys. The new model for remote control is now either the Apple TV RC, the Android TV RC or the Google TV remote control. All these RC are small, easy to use with only 10 to 15 keys instead of the 40 to 50 keys. I saw that. in the past LG introduced smaller remote control (see below the first image LG AN-MR500) but I am not sure it is supported with the LG OLED C3. I also saw that the latest projector CineBeam Q comes with a small new RC (see bellow). This new white RC has only the necessary keys (max 10) and seems to be fine ! Also, the new C4 is coming seoon and I suppose it will include a new Remote Control but we don't know yet what it is ... Do you have an idea to solve my issue ? 


  • Similar Tagged Content

×
×
  • Create New...