Quantcast
Jump to content

CAST TO MKV windows 10 Issue

Mohd Rafiq
 Share

Recommended Posts

Mohd Rafiq Newbie

Mohd Rafiq

Posted
Posted

Hi I was trying cast my media .mkv File to 43UH750V 4K tv but it start and Stops in 5 to 10 seconds, Meanwhile i can see it converts to .wmv file. Anyone try to cast (wihout smar share) in windows 10. Is this working or No? Any tweaks?

  • 8 months later...
marcopolo72 Newbie

marcopolo72

Posted
Posted
Hi I was trying cast my media .mkv File to 43UH750V 4K tv but it start and Stops in 5 to 10 seconds, Meanwhile i can see it converts to .wmv file. Anyone try to cast (wihout smar share) in windows 10. Is this working or No? Any tweaks?
How is connect laptop, pc to tv? Both working connected to router by Ethernet cable or tv working by wifi and computer is in different room etc?

Wysłane z mojego SM-G955F przy użyciu Tapatalka

Alessio1989 Apprentice

Alessio1989

Posted
Posted

If you enable the DLNA server on Windows 10 (just search for "enable media streaming") and if your video is inside a folder which is part of video library collection (which you can manage it through explorer or better and easily through windows media player), you can directly play all the videos (of the format and with the codec supported by your LG TV) directly from your PC without any additional transcoding. The cast is needed only for device that cannot directly play from your PC. If you have some content that needs realtime transcoding, installin plex player (on lg tv) and plex server (on your PC) may be a better solution (of course you need adequate hardware on your system, mainly a high level CPU).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Popular Now

  • Similar Topics

    • orgullodemexico
      LG TV & LG Sounbar issue
      By orgullodemexico
      I'm having an issue with my LG TV & LG Sounbar setup
      LG UJ6200 TV software 6.10.55
      LG soundbar 33217
      ISSUE:  All sound effects EXCEPT movie sound muted, requiring more volume to listen than MOVIE sound effect for live TV and Internet Streaming
      TV AUDIO SETTINGS:  Sound out ==> Audio Out (optical/HDMI ARC)
      Digital Sound PCM
      Simplink: ON
      I unplugged the sound power, pressed the power button for 60 seconds ==> no effect
      I pressed the volume down button on the sound bar while pressing sound effect on the remote for 60 seconds ==> No effect, did not get reset message.
    • Webos-developer
      AAC audio playback issue on LG 2024 /2025 tv models
      By Webos-developer
      Hi LG team,
       
      We are facing playback issues on LG 2024 and 2025 tv models when we try to play AAC audio content. The content starts playing but after a few seconds it pauses. We have tried with WebOS native player as well as Shaka Player and the behavior is same. We can play the aac audio content on tv models older than 2024.
      Tv model used: 
      LG -2025
      Model no - 43UA83006LA/2025
      Type- ultra HD/4kTv
      LG webOS- (10.3.1)
    • akhilesh malladi
      HDMI ARC Issue with LG C9 and how to fix it.
      By akhilesh malladi
      hi, Friends,

      i have finally fixed the HDMI ARC issue.
      Apparently some people also had the same issue and couldnt figure out whats wrong.
      After reading through AVSForums, I finally understood that LG had a bug in HDMI operation as well..

      The problem happens when your TV is already sending sound through HDMI ARC to a AVR and you try to connect additional sources like dth or blueray player to additional HDMI ports of TV and AVR. Once you add additional sources, you might try to use LG's device connector setting to control the device and this is where HDMI ARC stops working.

      Solution:
      disconnect all hdmi ports of TV and AVR.
      Full reset TV and AVR.
      Only Connect HDMI ARC port of TV with HDMI ARC OUT of AVR. Enable ARC feature on both TV and AVR. Open LG TV internal app,
      and check if sound is coming properly to AVR.
      Now you Connect All additional sources to other HDMI ports of TV and nothing should be connected to AVR.
      You may use LG device connector setting to configure the magic remote to control them.

      MY current setup of TV:
      HDMI 1: Airtel DTH.
      HDMI 2: ARC connected to Denon AVR 1500H.
      HDMI 3: ACT Television(Using this to play hotstar premium content as LG inbuilt APP is not playing it)

      Good news:
      LG magic remote can control all 3 devices seamlessly and thats a great ease for customers.
      I shall appreciate LG for this.
    • JasonB
      ‘Temporary issue occurred’ when trying to program universal control
      By JasonB
      Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
    • RJ Fischer
      Magic remote STB issue
      By RJ Fischer
      New LG 55" C4,  Magic Remote STB setup does not provide for Charter/Spectrum Arius STB model DCX3220? This is a current model STB and previous LG models did provide MR setup for this model. 

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...