- 0
-
Popular Now
-
-
Similar Topics
-
By mesplint
I have a LG 65QNED92AUA tv that has issues with the Bluetooth connection dropping off when connected to my earbuds. I believe the issue to be software related. LG has sent 2 technicians out to repair and the first technician changed the main board and Bluetooth transmitter which did not resolve the issue.
There are similar issues with Bluetooth Connection from others.
Since hardware replacement didn’t help and this is a known software-pattern issue, I would like push LG to specifically address it at the firmware/webOS level. I am unable to escalate to their software team and check if there’s a known patch or beta firmware for the QNED92 line.
For some reason this line of questioning is not available with in LG customer service.
Please help!
-
By chris7ben
The sound and picture are out of sync when screen mirroring from my iPhone 16 Pro to my LGQNED70A6A TV, using the internal speaker. I have tried all the recommended tips in the settings to cure the issue with no success. However, when I isolate the TV from the mains supply for 60 seconds and restart it, the syncing issue is cured but degrades after a day or so. My iPhone software is up to date and there is no firmware upgrade available for the TV. My LinkSys router has a full fibre connection. The only connection into the TV is the mains supply. Any help much appreciated. Thanks in advance.
-
By rems1989
Hi everyone,
I’m running into a very inconsistent issue when streaming my Windows 11 PC with apollo (fork of Sunshine) to my LG C4 TV using Moonlight (webOS).
The setup worked perfectly for about 6 months at 2K / 90 FPS with high bitrate.
Around 2–3 weeks ago, the issue started without any clear change on the PC side (possibly after a webOS update).
Symptoms:
• Moonlight on the TV shows “connection unstable” with a black screen
• Behavior is inconsistent and unpredictable :
Sometimes nothing works at all with black screen Sometimes 2K / high bitrate work or not yesterday 2K didn't work but lowest resolution (1280x..) worked • Streaming to my phone works fine, so the host PC and network seem OK
What I’ve tried:
• Clean reinstall of Moonlight on the TV and Apollo/Sunshine on the PC
• H.264 only (no HEVC, no AV1, HDR off for testing)
• All bitrate / FPS / resolution combinations
• Ethernet and Wi-Fi
• Different Windows display modes
• Virtual display disabled
Setup:
• Host PC: Windows 11, NVIDIA GPU (RTX 3070)
• Apollo installed on PC
• LG C4 TV, webOS 10.2.2, sideloaded Moonlight client (1.6.36)
• PC and TV tested on both Ethernet and Wi-Fi (2 gbps internet speed on my computer)
• Streaming to other clients (android phone) seems to work reliably
Feel free to ask me any information needed
Thanks for your help
-
By hjetschko
Hi, I have a feature request for the sound out setting. I often connect my Bluetooth headphones to the TV. We don't use the internal speaker of the TV, we use the optical sound out setting whenever I don't use Bluetooth. It would make our lives a lot easier if the TV can remember the last sound out setting before connecting to Bluetooth and default back to this setting when the Bluetooth device gets disconnected. At the moment, each time I disconnect the headphones I have to go back into settings and change the sound out setting from internal speaker to optical again.
Thanks and regards
Hubert
-
By John Peet
TV is a week old and the internal speaker has stopped working when in HDMI ARC + internal speaker sound output mode. The internal speaker itself works fine when in “internal speaker” sound output mode. I’ve checked all the settings that I can and can’t find anything that would correct this issue.
-
Question
AmuLulu
Since the latest SW release (03.33.11) on 65Nano90, the sound fed to my Marantz NR1711 via hdmi eARC cable is cutting out intermittently.
I am playing video from an attached HD disk plugged into TV direct to the TV
Previously working smoothly without interruptions
No problem with hdmi connected satellite receiver as the source
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.