- 0
-
Popular Now
-
-
Similar Topics
-
By mesplint
I have a LG 65QNED92AUA tv that has issues with the Bluetooth connection dropping off when connected to my earbuds. I believe the issue to be software related. LG has sent 2 technicians out to repair and the first technician changed the main board and Bluetooth transmitter which did not resolve the issue.
There are similar issues with Bluetooth Connection from others.
Since hardware replacement didn’t help and this is a known software-pattern issue, I would like push LG to specifically address it at the firmware/webOS level. I am unable to escalate to their software team and check if there’s a known patch or beta firmware for the QNED92 line.
For some reason this line of questioning is not available with in LG customer service.
Please help!
-
By Aurelian
Bună ziua!
Am un televizor model 43UA740003LB, care se resetează excesiv de des , mai ales când este folosit pe streamming , dar îngrijorător, este faptul că se resetează și când este folosit că TV.
Mă puteți ajuta să înțeleg care sunt motivele pentru care televizorul se resetează atât de des?
Cu stimă,
Negritoru A
English Translation:
Hello! I have a TV model 43UA740003LB, which resets excessively often, especially when used for streaming, but worryingly, it also resets when used as a TV. Can you help me understand what are the reasons why the TV resets so often? Best regards, Negritoru A
Open in Google Translat
-
-
By chris7ben
The sound and picture are out of sync when screen mirroring from my iPhone 16 Pro to my LGQNED70A6A TV, using the internal speaker. I have tried all the recommended tips in the settings to cure the issue with no success. However, when I isolate the TV from the mains supply for 60 seconds and restart it, the syncing issue is cured but degrades after a day or so. My iPhone software is up to date and there is no firmware upgrade available for the TV. My LinkSys router has a full fibre connection. The only connection into the TV is the mains supply. Any help much appreciated. Thanks in advance.
-
By KKTPA
I have a Denon AVR hooked up to the HDMI 2 input on my LG tv. When I initially set it up, I was able to control the volume of the Denon receiver by using the LG remote. I enabled CEC Simplink and eARC on the TV and this allowed me to not only use the volume but also turn the receiver on and off automatically with the TV. Recently, my LG tv installed a software update and ever since that point, the TV reverts to TV Audio instead of HDMI 2 every time I turn the TV off and back on again. I then have to change the sound setting to HDMI and the volume control works perfectly.
Any tips? I already tried unplugging everything including the HDMI cables, turning CEC and eARK off and back on again, and reverting to all original settings but nothing seems to work.
My Denon receiver does not have eARC support, not sure if that matters but I'd love to know the best way to set it up to control volume through one remote.
-
Question
Gra27
Hi, A couple of issues with the new TV:
When using the magic remote that came with the TV, the mute function (mainly to silence commercials) only lasts for about 45 seconds;
also there is a constant sound drop out every couple of minutes, it only lasts for a second but is annoying.
The TV has the latest software
I am using external speakers (Kef LS 50 wireless 2) connected via eARC HDMI cable (Audioquest),
Simplink in ON.
Wondering if anyone has these issues with either LG or Kef
Thanks
Graham
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.