- 0
Youtube app NO SOUND
-
Popular Now
-
Similar Topics
-
By FUNTIK
please add 10bit sdr and hevc supports to webos and youtube support all new cameras has this and lg webos still can't handle properly hevc on youtube or inside webos.
Pleae add support for 10bit sdr and hevc codec.
-
By FUNTIK
I have noticed a problem with webOS, i have С4 OLED and G5 OLED - and all of them running videos on youtube at low 1080p or no higher that 1440p with 50/60p - and i don't understand why.. everywhere else is fine, but on webOS is 50/50 i tried every codec possible and everytime my videos stuck on 1080p or 1440p - it's a problem! please fix it!
PS everything is fine if i upload 4k25p or 4k30p
PSS it's a problem only on webOS - on PC or android everything is OK.
-
By Simon1973
I recently bought a 50NANO90A6B TV and so far I have to say it's a fantastic upgrade from my old Sony 40".
However, I've one small niggle problem (only had the TV since Sunday)... The YouTube app doesn't seem to want to work! it shows the logo with a spinny circle, then the logo starts again with the spinny circle... this just repeats over and over.
All other apps (iPlayer, Jellyfin, Plex, ITV, CH4 etc...) work as does the LGTV app, so the WiFi connection is fine!
I've uninstalled and reinstalled the YouTube app a few times, but it does the same each time!
Anyone know how I can sort this? any other suggestions for fixing it!
I'm currently using my Chromecast with GoogleTV for YouTube at the moment.
I'm in the UK by the way! And the TV is set to that, in all the relevant settings locations.
-
By chris7ben
The sound and picture are out of sync when screen mirroring from my iPhone 16 Pro to my LGQNED70A6A TV, using the internal speaker. I have tried all the recommended tips in the settings to cure the issue with no success. However, when I isolate the TV from the mains supply for 60 seconds and restart it, the syncing issue is cured but degrades after a day or so. My iPhone software is up to date and there is no firmware upgrade available for the TV. My LinkSys router has a full fibre connection. The only connection into the TV is the mains supply. Any help much appreciated. Thanks in advance.
-
By bohatier
Hi,
I believe it started to happen after last update - version 03.53.45, maybe the one before. After I quit YouTube app, TV will not get signal from HDMI settopbox no matter I try. Only solution is to unplug and plug back HDMI cable which is really annoying. Is it known issue? Is there any fix? I tried few workarounds, like disabling smart features and so on, but no luck.
TV model: OLED55B13LA
Example:
Settopbox is powered on, TV is showing signal over HDMI, everything is fine. Then I open YouTube, after some time exit, switch back to HDMI input of settopbox and TV says no signal. I re-plug cable and then it works fine.
-
Question
Michelle van Asperen
The Youtube app has been working fine until Friday 27th November. Switched on as I do every day to see news, and have video but no sound. Did the usual switch off, unplug etc but still no sound Other apps work fine.
I noticed there was an update to this app dated 22/11/2020 but my issue only started later. Have automatic updates "on". Is this a buggy update?
3 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.