- 0
-
Popular Now
-
-
Similar Topics
-
By mesplint
I have a LG 65QNED92AUA tv that has issues with the Bluetooth connection dropping off when connected to my earbuds. I believe the issue to be software related. LG has sent 2 technicians out to repair and the first technician changed the main board and Bluetooth transmitter which did not resolve the issue.
There are similar issues with Bluetooth Connection from others.
Since hardware replacement didn’t help and this is a known software-pattern issue, I would like push LG to specifically address it at the firmware/webOS level. I am unable to escalate to their software team and check if there’s a known patch or beta firmware for the QNED92 line.
For some reason this line of questioning is not available with in LG customer service.
Please help!
-
By chris7ben
The sound and picture are out of sync when screen mirroring from my iPhone 16 Pro to my LGQNED70A6A TV, using the internal speaker. I have tried all the recommended tips in the settings to cure the issue with no success. However, when I isolate the TV from the mains supply for 60 seconds and restart it, the syncing issue is cured but degrades after a day or so. My iPhone software is up to date and there is no firmware upgrade available for the TV. My LinkSys router has a full fibre connection. The only connection into the TV is the mains supply. Any help much appreciated. Thanks in advance.
-
By KKTPA
I have a Denon AVR hooked up to the HDMI 2 input on my LG tv. When I initially set it up, I was able to control the volume of the Denon receiver by using the LG remote. I enabled CEC Simplink and eARC on the TV and this allowed me to not only use the volume but also turn the receiver on and off automatically with the TV. Recently, my LG tv installed a software update and ever since that point, the TV reverts to TV Audio instead of HDMI 2 every time I turn the TV off and back on again. I then have to change the sound setting to HDMI and the volume control works perfectly.
Any tips? I already tried unplugging everything including the HDMI cables, turning CEC and eARK off and back on again, and reverting to all original settings but nothing seems to work.
My Denon receiver does not have eARC support, not sure if that matters but I'd love to know the best way to set it up to control volume through one remote.
-
By hjetschko
Hi, I have a feature request for the sound out setting. I often connect my Bluetooth headphones to the TV. We don't use the internal speaker of the TV, we use the optical sound out setting whenever I don't use Bluetooth. It would make our lives a lot easier if the TV can remember the last sound out setting before connecting to Bluetooth and default back to this setting when the Bluetooth device gets disconnected. At the moment, each time I disconnect the headphones I have to go back into settings and change the sound out setting from internal speaker to optical again.
Thanks and regards
Hubert
-
By Daniel Buxton
Hi,
Since updating our OLED65G2PSA to 23.20.56, we experience sprodadic issues with the network where any app requiring network access shows the generic 'no network access' message.
I have found that when this does happen, I can still PING the TV and connect to IP based web pages. To fix I can either power cycle the TV or I can go into network settings and toggle off/on 'Set automatically' which must just be triggering something in the underlying OS to reload its DNS service.
Setting a static IP makes no difference, setting a static DNS server makes no difference - it is clearly a software issue. We have had a TV repair company come and replace the boards, which worked right up untill updating to 23.20.56 and beyond.
Has anyone else experienced this, does anyone have a solution ?
-
Question
[email protected]
So I’ve got a problem with my soundbar and it’s connection with the TV. I’ve got the LG OLED tv and the LG sound bar with optical wire connection. Every time I put the tv into standby and turn it back on again later the sound bar goes from standby to on but no sound comes out. The only way I can make it interact is to switch the power off for the tv and sound bar. It then works fine until I turn the tv into standby again. Does anyone have any idea why this might be. TIA
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.