Quantcast
Jump to content

  • 1

USB Always On Option

atclaus

Asked by atclaus,

 Share

Question

atclaus Newbie

atclaus

Posted
Posted

Is there an option somewhere to turn the USB ports to always be powered on? I two LG TVs and have a Chrome Cast and a Fire TV plugged in that I would like to remain on even when the TV is off. Looked around the menus and could not find. Thanks

  • Like 1

7 answers to this question

Recommended Posts

  • 0
atclaus Newbie

atclaus

Posted
  • Author
Posted

Ease of power cords and cleanliness of wires. The USB ports are right there and unless I were to attach a thumb drive, I am not sure what purpose they serve besides offering power.

  • Like 2
  • 0
Matthew Paganini Newbie

Matthew Paganini

Posted
Posted
On 12/24/2018 at 5:51 PM, atclaus said:

Is there an option somewhere to turn the USB ports to always be powered on? I two LG TVs and have a Chrome Cast and a Fire TV plugged in that I would like to remain on even when the TV is off. Looked around the menus and could not find. Thanks

Ever find a solution to this? I would really like to have this option as well

  • Like 1
  • 0
udance4ever Newbie

udance4ever

Posted
Posted
On 1/17/2019 at 7:18 AM, nemilose said:

Why don't you use an external power adaptet? 

thanks for the idea!  I, too, was looking for cord management and this idea never occurred to me.  I busted out the USB extension & power adaptor I sure was going straight to the landfill and problem solved: we dont have to wait for the Roku to boot & probably what was more concerning was the TV freaks out while the Roku boots (flashes black multiple times) & once crashed the display driver to the point of being all green with lots of vertical black lines - unplugging the TV was the only way to reboot it.  needless to say, on a 1d old TV, not very comforting - now we dont have to worry about this failure vector!

and, for the record, it would be great if WebOS had a s/w switch to enable USB ports to always be powered.

  • 0
Cory Newbie

Cory

Posted
Posted

How can LG TV's power up in USB mode and auto play the file? We are using some TV's as displays in museum with USB drives attached with files. Would like when TV powers on in due to IR signal to start up by playing file. Anybody help

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing

  • Popular Now

  • Similar Topics

    • Farhad Radka
      Area Option locked on 2024 QNED (webOS25) - Russia unit, need ME/CIS unlock
      By Farhad Radka
      Hi all, hoping for some expert help.
      TV: LG 65QNED86T6A.ADKFLJD (Russia-market unit, now in Iran), S/W 33.31.68.01 (webOS25), 2024 build.
      Location settings only show CIS/Russian-speaking countries.
      Using an original Factory SVC Remocon (WK-17226), both IN START and ADJ (code 0413) lead to the same SVC menu.
      Current Area Option values: Area Code 3638 / Continent Index 54 / Language&Country CS / HW Settings EU.
      I've tried entering various Area Option codes (adjacent blocks 3712/3840/3968, and legacy ME/CIS codes from older webOS threads) — all rejected with an error. Continent Index / Language&Country / HW Settings appear to be read-only/derived fields, not directly editable.
      Has anyone successfully changed the Area Option on a 2024-model webOS25 QNED TV? Any known working codes or is this generation's SVC menu fully locked without RTOOL/GSDF access?
       

      link hidden, please login to view  

    • stevef
      BUG!!! Audio over ARC always muted since WebOS 5.5 update on lg-oled65c9pla
      By stevef
      Since my lg-oled65c9pla auto-updated to WebOS 5.5, there is a new bug.
      The TV is connected to my Cambridge Audio Evo 75 amplifier over ARC - on powering the TV, it has always started up the amp, and switched it to use audio, instead of the appalling TV speakers. The whole setup has worked flawlessly for 5 years, but since WebOS 5.5, the amplifier starts, but is left in a muted state, and using the un-mute or volume controls on the TV remote makes no difference to turning on audio. The only way to get audio to play though my amp a speakers is to turn the amp's volume dial or press a volume button on the a amp's remote - this then unmutes the TV and audio is back. 
      There is no setting I can find in the TV that relates to whether the ARC channel starts muted or not...
      No software has changed in my amp.  This is an annoying new bug in the TV software, I assume down to some CEC changes.
       
    • akacabo
      Area option won't change
      By akacabo
      I am trying to change my tv region from middle East to USA but changing won't take effect
      What should I do here that I am missing
    • jmk
      Request for a new option of "Sound Output" or a change of the existing options
      By jmk
      My LG TV : Model 75UM7000PLA
      The Problem:
      When I want to use my wireless optical headphones, I switch the TV “Sound Out” option to “Optical” or “Internal TV Speaker + Optical.” But when I do this, the TV sends a command to the Yamaha receiver that forces it to switch its input to Optical. This stops playback of my HDMI device connected to the Yamaha because the Yamaha input is changed.
       
      What I would like:
      Can LG update the TV firmware so that:
      1️⃣ When I select “Optical” or “Internal TV Speaker + Optical” in “Sound Out,” it does not cause the Yamaha receiver to switch its input source?
      OR
      2️⃣ Add a new “Sound Out” option that sends audio to Optical without sending a command to change the Yamaha input?
      OR
      3️⃣ Make the existing “Internal TV Speaker” mode also output audio through Optical, but without causing the Yamaha input to switch?
       
      Note:
      Disabling ARC is not a good solution because:
       
      Audio from devices connected to the Yamaha receiver still plays on both TV and Yamaha speakers.
       
      Audio from devices connected to the TV no longer plays on the Yamaha speakers.
       
      Thank you!
    • Sol Harold
      Area Option Service Codes Oled 2021 models
      By Sol Harold
      Hi All,
       
      i’ve got an OLED 55C1 with webOS 6.0 and a service remote in South America. 
       
      I’ve been able to find working area codes for almost all regions using the service remote based on previous posts and tables. 
       
      Of most use to me were:
      Brazil: 26895 (local DTV transmission settings) /22800 (BR/US DTV transmission settings)
      US: 1843 / 1793 / 22287
      UK/EU/Turkey: 3122
      AU Australia: 767
      JP Japan: 23439
      I’ve also found working codes for China (CN), Taiwan (TW), Hog Kong (HK), Philippines (PH), Australia, NZ & South Asia incl. India (AJ), certain African and Middle Eastern countries (JA or JA ME IL regions: note Israel is not an option even though IL appears in the code) , Canada (CA), Mexico (MX), Panama and Central America (PA), Ecuador (EC), Colombia (CO), Peru (PE), Chile (CL), and Argentina (AR).
      Notably absent were working codes for;
      Israel (IL)
      Korea (KR)
      Russia and CIS countries (RU CIS)
      Eastern Europe (ETC?)
      Does anyone know the working area option service codes for these countries?
      I am mostly interested in working IL and KR codes.
       
      thank you so much!
       
       
       

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...