Quantcast
Jump to content

Question

Posted

Dear Friends ,
Really looking forward to your help and support
My problem is i can not make work the HDMI ARC conection between TV and Sound Bar

So far:


 

TV LG OLED55B7P-S (latest firmware)

Sound Bar LG SK9Y (latest firmware)

NVidia Shield Pro 2017 (latest firmware in my region, waiting for Oreo)

HD Set Top Box Arris/Motorola (Cable) HDMI

Used the device manager on the WebOS to connect the Sound Bar , assigned HDMI ARC , Simplink , and tried both auto power yes and no, sound test did not work

 

NVidia shield connected to SK9Y HDMI IN , HDMI OUT (ARC) to TV LG HDMI 2 (ARC)

Works fine image and sound, sound of course is ok as it goes from NVidia to SK9Y directly

 

HD cable top box to TV LG HDMI 4 and I get no sound from the TV thru the HDMI ARC port (previously establish  HDMI 2 (ARC) to sound bar)  

I plug in the optical and works fine, Internal tv speakers works fine , BT fine….everything works but the HDMI ARC.

 

What I am doing wrong?  I am worry it may be a HDMI ARC port problem, TV Is about 3 months old, soundbar is about 2 weeks old


Thank you in advance

3 answers to this question

Recommended Posts

  • 0
Posted

Nice soundbar! My idea is probably too simple. When setting up my LG TV & LG soundbar I couldn't get any sound via ARC either. 

My soundbar has 2 HDMI connections one marked sound in and naturally, I connected the TV ARC port to the soundbar  port port marked Sound In.  I couldn't get any sound unless I used the optical connection. To my surprise, I found that if I used the other HDMI port on the soundbar it worked perfectly! This still seems wrong to me but everything works and sounds good so have not made any inquiries. 

  • 0
Posted
On 6/24/2018 at 9:12 AM, Superplonk said:

Nice soundbar! My idea is probably too simple. When setting up my LG TV & LG soundbar I couldn't get any sound via ARC either. 

My soundbar has 2 HDMI connections one marked sound in and naturally, I connected the TV ARC port to the soundbar  port port marked Sound In.  I couldn't get any sound unless I used the optical connection. To my surprise, I found that if I used the other HDMI port on the soundbar it worked perfectly! This still seems wrong to me but everything works and sounds good so have not made any inquiries. 

Hi Mate

 

Thanks for your reply ,  yes is a great SoundBar I really like it

 

I already tried that , swap ports to see if it made a difference , same result no luck.

In my case the correct way as described by LG as by Industries standards it should be from Soundbar HDMI(ARC) out to TV HDMI (ARC) in.......and is not working

I am almost 100% positive there is an issue with the TV, I tried with a 2nd sound bar and i got the same result

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By NaveenKumar
      Latest version of sun NXT app version 8.0.20 is not working for web os  Tv version 4.4.2-11 plz do the needful full & Airtel Xstream is not found in your web os platform kindly check on that too
    • By jikhead
      I'm not getting any audio from the apps via the HDMI via ARC connection to my receiver.  This occurred two weeks ago and was unable to resolve it, but ironically there was new firmware released that same day for my B6 (3/31/17) and this fixed the issue.  However, now I again can't get it working after a TV reset and tinkering with the audio settings again.  I tried to load the firmware again, but it appears this is not possible to forceable load the same firmware.
    • By chris7ben
      The sound and picture are out of sync when screen mirroring from my iPhone 16 Pro to my LGQNED70A6A TV, using the internal speaker. I have tried all the recommended tips in the settings to cure the issue with no success. However, when I isolate the TV from the mains supply for 60 seconds and restart it, the syncing issue is cured but degrades after a day or so. My iPhone software is up to date and there is no firmware upgrade available for the TV. My LinkSys router has a full fibre connection. The only connection into the TV is the mains supply. Any help much appreciated. Thanks in advance.
    • By bohatier
      Hi,
      I believe it started to happen after last update - version 03.53.45, maybe the one before. After I quit YouTube app, TV will not get signal from HDMI settopbox no matter I try. Only solution is to unplug and plug back HDMI cable which is really annoying. Is it known issue? Is there any fix? I tried few workarounds, like disabling smart features and so on, but no luck.
      TV model: OLED55B13LA
      Example:
      Settopbox is powered on, TV is showing signal over HDMI, everything is fine. Then I open YouTube, after some time exit, switch back to HDMI input of settopbox and TV says no signal. I re-plug cable and then it works fine.
    • By Stylianos
      i am having an issue with my LG OLED77C2 tv that started happening (i believe) once i have updated from web24 to 25. It seems like whenever the tv is displaying a source from any of my four HDMI inputs, while i am watching the screen goes black randomly for a few seconds and it loses audio as well during the black screen. Once this happens the audio usually comes back as soon as the image does, however not always. The audio might dissapear completely. In order to fix that i might need to power cycle the tv or unplug the hdmi input out, wait a little and then plug back in. Moreover, sometimes when the black screen flash happens it cripples most of my native apps on the tv. So if i switch to netflix or youtube right after the black screen flash, both apps populate normally all the video/film options in the main menu but when i try to actually play any of the video/films, they dont play and it is throwing an error. These black flashes never happen when i am watching netflix or youtube. Only when using my hdmi inputs. ive changed brand new high quality cables but that did not fix my issue. For the xbox i was already suing an ultra hish speed 2.1 hdmi cable but ive re placed that as well with a brand new one. ive also changed the tvs main board to a brand new and it still happening. Once the dealer changed the board, the tv was behaving normally without the issue. However after a few days i updated the tv to the latest firmware and this started happening. what do i do? 
      FYI: I tried EVERY SINGLE option to troubleshoot the issue. Disabled VRR, AMD Freesync, ALLM, HDMI Deep Colour, SIMPLINK, I basically set my tv to display video and audio in the most archaic way just to troubleshoot. Still doing it. I am using an xbox series x on input 1 and a mag520 box on input 3. Does it on both sources. Moreover, in case this helps whenever this happens while on the xbox the Dolby vision/HDR logo appears on the top right right after the video comes back once the black screen is over depending on what settings i have the xbox on. Also swapped to different inputs. Still doing it

×
×
  • Create New...