I have the 2016 LG OLED65E6P purchased 2/19/2017 with the "magic remote" and recently, the remote control has become unreliable. It worked perfectly until a few weeks ago and I'm not sure what changed. The remote seems to work properly when the TV is first turned on, but later, I have to press a button repeatedly to get any effect. It's not bad buttons, it's like the buttons only send the signal to the TV intermittently. The red light at the top of the remote sometimes flashes red, sometimes goes solid red for a few seconds, and sometimes does nothing when I press the button (I couldn't find a description of what the light does). It's very frustrating.
I mostly make due by repeatedly pressing the button that turns on the teardrop cursor -- after maybe 10 times it'll come on, and then I can use the cursor to operate the TV until it times out. So that works, but it's not a good solution because it's hard to get the cursor turned on.
I put in fresh batteries several times to see if that's the problem -- it made no difference. Plus the cursor works fine, when I can get it turned on.
I was also hopeful that a firmware update caused this problem and it will be resolved.
The remote doesn't seem to require line-of-sight to work. Does the remote use bluetooth or WiFi? I sometimes use Bluetooth headphones with the TV and those work fine.
Has anyone else had this problem with the remote -- and if so, how did you solve it?
(I do have an extended warranty so in theory I can get a replacement remote -- but I'd rather not spend an hour on the phone if this is a common problem.)
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Add the option to turn off mouse acceleration. I think I would fins it much easier to aim the pointer if I could disable it. I always disable it on computers. You can just add it next to the pointer speed setting under General > System > Additional Settings > Pointer Options
Two other settings I think would make sense to have would be a setting to disable the shake-remote-to-show-pointer feature. Although I like it I can sometimes find it annoying, so why not let the users decide. I always hate it when there aren't settings for things like these.
The other setting would be to disable the pointer completely as many users have written that they want to disable it.
I really love lg tvs hence I now own 3 but what I can’t get past that drives me crazy is any remote turns all tvs on of change Chanel etc and when I’m watching something and the wife changes channel in kitchen tv and the lounge tv chance drives me crazy I’ve unpaired and repaired individually and it still has the same problem
Latest version of sun NXT app version 8.0.20 is not working for web os Tv version 4.4.2-11 plz do the needful full & Airtel Xstream is not found in your web os platform kindly check on that too
I'm not getting any audio from the apps via the HDMI via ARC connection to my receiver. This occurred two weeks ago and was unable to resolve it, but ironically there was new firmware released that same day for my B6 (3/31/17) and this fixed the issue. However, now I again can't get it working after a TV reset and tinkering with the audio settings again. I tried to load the firmware again, but it appears this is not possible to forceable load the same firmware.
Hi,
I believe it started to happen after last update - version 03.53.45, maybe the one before. After I quit YouTube app, TV will not get signal from HDMI settopbox no matter I try. Only solution is to unplug and plug back HDMI cable which is really annoying. Is it known issue? Is there any fix? I tried few workarounds, like disabling smart features and so on, but no luck.
TV model: OLED55B13LA
Example:
Settopbox is powered on, TV is showing signal over HDMI, everything is fine. Then I open YouTube, after some time exit, switch back to HDMI input of settopbox and TV says no signal. I re-plug cable and then it works fine.
Question
InvaderZim
I have the 2016 LG OLED65E6P purchased 2/19/2017 with the "magic remote" and recently, the remote control has become unreliable. It worked perfectly until a few weeks ago and I'm not sure what changed. The remote seems to work properly when the TV is first turned on, but later, I have to press a button repeatedly to get any effect. It's not bad buttons, it's like the buttons only send the signal to the TV intermittently. The red light at the top of the remote sometimes flashes red, sometimes goes solid red for a few seconds, and sometimes does nothing when I press the button (I couldn't find a description of what the light does). It's very frustrating.
I mostly make due by repeatedly pressing the button that turns on the teardrop cursor -- after maybe 10 times it'll come on, and then I can use the cursor to operate the TV until it times out. So that works, but it's not a good solution because it's hard to get the cursor turned on.
I put in fresh batteries several times to see if that's the problem -- it made no difference. Plus the cursor works fine, when I can get it turned on.
I was also hopeful that a firmware update caused this problem and it will be resolved.
The remote doesn't seem to require line-of-sight to work. Does the remote use bluetooth or WiFi? I sometimes use Bluetooth headphones with the TV and those work fine.
Has anyone else had this problem with the remote -- and if so, how did you solve it?
(I do have an extended warranty so in theory I can get a replacement remote -- but I'd rather not spend an hour on the phone if this is a common problem.)
8 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.