Quantcast
Jump to content

To Use Phone As Remote Control = Must Use WiFi ??!!


Recommended Posts

i thought of using my handphone to act as a remote control for the TV.............but it will only work with WiFi ??!!☹️

i had BlueTooth still turned on..............TV is using LAN connection only.........and the phone can no longer control the TV (the phone can control the TV with WiFi on)............is this normal ?? image.gif.569c0d120dbb9c1c6096202eb8dd91f3.gif


many thanks in advance............

Link to comment
Share on other sites

I do not know what a handphone is.

What does your TV use for the remote control? As far as I know most remote controls use InfraRed (IR). Many also use Radio Frequency (RF). I believe it is highly unusual for a remote control to use WiFi or Bluetooth. Smartphones can use WiFi and many TVs are able to respond to signals over WiFi. I am not an expert but I think it is unusual for devices to use Bluetooth for remote controls. If your TV supports it then you probably must pair the phone to the TV using a setting in the Bluetooth section of the settings that is provided for paring as a remote control that is different from pairing as a headphone.

When you say LAN connection only I assume you mean Ethernet. The TV has a cable plugged in that comes from the router, correct? Are you sure the TV says it is connected using Ethernet? Sometimes a router needs to be restarted to get a new connection.

In Amazon I see some IR adapters for smartphones. I do not know how they work but that might make it possible to use the phone.

Link to comment
Share on other sites

1 hour ago, Sam Hobbs said:

I do not know what a handphone is.

What does your TV use for the remote control? As far as I know most remote controls use InfraRed (IR). Many also use Radio Frequency (RF). I believe it is highly unusual for a remote control to use WiFi or Bluetooth. Smartphones can use WiFi and many TVs are able to respond to signals over WiFi. I am not an expert but I think it is unusual for devices to use Bluetooth for remote controls. If your TV supports it then you probably must pair the phone to the TV using a setting in the Bluetooth section of the settings that is provided for paring as a remote control that is different from pairing as a headphone.

When you say LAN connection only I assume you mean Ethernet. The TV has a cable plugged in that comes from the router, correct? Are you sure the TV says it is connected using Ethernet? Sometimes a router needs to be restarted to get a new connection.

In Amazon I see some IR adapters for smartphones. I do not know how they work but that might make it possible to use the phone.

 

many thanks for your reply...............LG told me i need my phone to connect to wifi to control the tv...............

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By u84six
      I haven't searched this forum, but there has to be others who find that tv remote pointer to be extremely annoying. I'm actually surprised that we still can't turn that feature off. Having the cursor/pointer feature isn't even close to the importance of being able to shut off. I mean, how hard is to put one checkbox in the ui to toggle the feature on or off? It seems like a no-brainer, big bang for the buck change that many users would appreciate
    • By David Daul
      My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working.  I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote."  Well... this really stinks because the remote doesn't work!!!  I have tried a USB mouse, a new magic remote, other LG Remotes with no luck.  I have also tried using the button on the bottom of the tv.  And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
      This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs.  Does anyone have a trick for getting past this initial screen???
      Thanks for the help.
    • By Damian1
      After searching high & low, & also on the difficult to navigate LG website, I can't find which magic remote is compatible for my TV.
       
      The model.of my LG TV is - 32LQ630B6LA
      Can anybody assist, please?
       
      Many thanks.
    • By leodavid
      Hi,
      I've recently purchased a WebOS TV UK6400PVC and magic remote came with it. The software version is 4.10.30.
      The buttons work fine but for some reason, I can't get the cursor to appear on screen.
      Appreciate the help. Thanks
    • By Gets
      I have a TV SM8200PLA, which magic mote should I buy?
×
×
  • Create New...