- 0
-
Popular Now
-
-
Similar Topics
-
By MNW
I've had Universal Control via the smart remote sucessfully controlling the audio (volume) for my LG OLED 48C1LB tv via my Sherwood RD-6118R amp for a while now; But following a power cut, the remote no longer controls the amp/tv volume?
The audio IS still being played through the amp using the optical OUT/IN but I have no control of the volume
I've removed and re-initialised the settings for this amp in Universal Control Settings but following the "success" message, the remote does not control the volume on the amp/tv.
What am I missing?
-
By Dscottbellamy
how can I fix lg soundbar model sn6y volume automatically going down after exactly 30 minutes if resetting, unhooking volume down button, drilling vent holes near motherboard, and running a cooling fan did not fix the problem.
-
By akhilesh malladi
hi, Friends,
i have finally fixed the HDMI ARC issue.
Apparently some people also had the same issue and couldnt figure out whats wrong.
After reading through AVSForums, I finally understood that LG had a bug in HDMI operation as well..
The problem happens when your TV is already sending sound through HDMI ARC to a AVR and you try to connect additional sources like dth or blueray player to additional HDMI ports of TV and AVR. Once you add additional sources, you might try to use LG's device connector setting to control the device and this is where HDMI ARC stops working.
Solution:
disconnect all hdmi ports of TV and AVR.
Full reset TV and AVR.
Only Connect HDMI ARC port of TV with HDMI ARC OUT of AVR. Enable ARC feature on both TV and AVR. Open LG TV internal app,
and check if sound is coming properly to AVR.
Now you Connect All additional sources to other HDMI ports of TV and nothing should be connected to AVR.
You may use LG device connector setting to configure the magic remote to control them.
MY current setup of TV:
HDMI 1: Airtel DTH.
HDMI 2: ARC connected to Denon AVR 1500H.
HDMI 3: ACT Television(Using this to play hotstar premium content as LG inbuilt APP is not playing it)
Good news:
LG magic remote can control all 3 devices seamlessly and thats a great ease for customers.
I shall appreciate LG for this.
-
By crct
I have a 42 inch LG OLED evo AI C4 4K Smart TV 2024 with a USE6S soundbar connected via HDMI.
Up until a few days ago, the iPhone app was connected via WiFi. I could use it to control the sound effect.
The sound bar remote could also change the sound effect, and the volume with the volume control visible on the TV screen.
Now the iPhone app does not connect to the soundbar and the remote control doesn't appear to alter the volums: there's no on screen display.
And also, the TV WOWcast output is not 'sticky': that it to say I can select it, and it remains for a time, but drops.
-
By JasonB
Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
-
Question
RCarlton
I have a 2 year old LG smart TV and A LG soundbar. Periodically the volume will drop way down and when I turn the TV off and on it restores to regular volume. TV or soundbar? Any ideas?
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.