Quantcast
Jump to content

  • 0

WebOS Defaults to Apps Screen after Latest Update


desart1566

Question

I noticed since the last update of WebOS, it defaults to a screen with apps along the bottom rather than HDMI1 as before on startup.  Even after going into the input settings and selecting HDMI1, it stills defaults to the other screen on startup.  When selecting HDMI1 on the inputs screen, it has a red dot in the corner, which I would assumes means that's the selected default.  But again, this seems to be ignored this on startup.

Thanks.

  • Like 2
Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 1
On 5/18/2023 at 9:10 AM, Dale S said:

I noticed since the last update of WebOS, it defaults to a screen with apps along the bottom rather than HDMI1 as before on startup. 

Try this, and see if it works...

Go to Settings / Home Settings / Home Auto launch

Turn this setting OFF

  • Like 3
Link to comment
Share on other sites

  • 0
9 hours ago, desart1566 said:

I noticed since the last update of WebOS, it defaults to a screen with apps along the bottom rather than HDMI1 as before on startup.  Even after going into the input settings and selecting HDMI1, it stills defaults to the other screen on startup.  When selecting HDMI1 on the inputs screen, it has a red dot in the corner, which I would assumes means that's the selected default.  But again, this seems to be ignored this on startup.

Thanks.

Same here, had to track down a remote, Flippen annoying. Yes with my android box remote I can hit the source button and go to current HDMI port, but it was nice to just have the last used HDMI port be the default when I turn on the TV, now I gotta explain to the wifey, the new step to watching TV.... Kind of hurts the WAF

  • Like 1
Link to comment
Share on other sites

  • 0
On 5/17/2023 at 6:10 PM, Dale S said:

Same here, had to track down a remote, Flippen annoying. Yes with my android box remote I can hit the source button and go to current HDMI port, but it was nice to just have the last used HDMI port be the default when I turn on the TV, now I gotta explain to the wifey, the new step to watching TV.... Kind of hurts the WAF

That fixed it, thank you, thank you, I looked all over for this setting, and couldn't find it...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Roy Brown
      webOS updated, I think to 2023, on my C2 a couple of days ago. Since then the News option on the Sky News app no longer works, instead timing out. The Weather and Climate options still work, though.
      I have deleted and reloaded the Sky News app, but the problem remains.
      Does anybody have any suggestions of what I might try to get this working again, or is this something for LG, or Sky, to fix?
    • By Glamma2311
      My tv is acting strangely after there was a software update (sometime between April 10-15,2024)
      randomly turning off and on -- many times within a few minutes remote works some of the time or only certain buttons goes to a colored screen i.e. purple, yellow, light blue with no image just color sudden annoying continuous, high pitch sound like an alarm Checked and reset the cable box and called cable company. 
      Unplugged and plugged tv back in.
      Change the HDMI input
      It is becoming very frustrating. 
    • By OliverRC
      Up until a few days ago my TV and AVR have been working perfectly since I bought it.
      Zero hassles with HDMI and connectivity.
      Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
      Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
      I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
      This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
      I’ve tried:
      Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
      Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
      Marantz SR5015 Nvidia Shield Pro PS5
        The setup is the conventional AVR installation as shown in the attached file

       
      Has anyone else experienced this? 
      Is it possible to revert the software update?
    • By Derek Weselake (WEZ)
      Hey there,  I have had a  OLED55B6P for ten months and I love it but

      I have a problem all a sudden, just today it starts to show a black screen with fire works every minutes if I don't press a button on the remote.

      I have no eco mode on, no power save modes on, TV firmwire is up to date, and tried turning off on and on the tv.

      anyone know how to fix?
    • By Beushaw
      Another unwanted update, bringing unwanted changes and now my Cambridge Audio soundbar is screwed.
      My LG TV just performed an auto update to WebOS 13.30.56. When the TV restarted, all I now get out of the ARC connection is a constant loud buzzing, no programme audio. Well done LG software team. A triumph! 
      I have tried resetting the soundbar (it plays fine if I plug in an external device) but all I get from the LG TV is BUZZZZZZZ. I tried restarting both the TV and the Soundbar: BUZZZZZZZZZ. I tried a new HDMI cable BUZZZZZZZZ. So what do I do now?? I did not want this OS update, it brings nothing to me and everything was working perfectly before the update and sound on the (awful) inbuilt LG TV speakers is working, but the ARC audio output to my rather lovely Cambridge Audio soundbar is now, since the Web OS update, just a constant BUZZZZZZZ. I decided to try the Optical output of the LG connected to the soundbar instead. The soundbar is flashing "AUDIO ERROR" at me (I have tried all of the different audio output format options, all with the same result).
      It really pi$$es me off when software teams release badly executed updates that break their customers devices. We are not your R&D test department LG, we are paying customers with whom you lose trust, brand loyalty and future sales when poor engineering teams release software updates that are not fully tested. God only knows what LG have done here but after 2 hours of trying to resolve an issue THEY caused on my setup, I have given up.
      Has anyone else had this issue and have suggestions please? I have tried to contact LG using their Email Support function, wading through the multiple layers to get to the right page and spending time typing up all the details of my support request, etc, but no response yet (other than the automated bot stuff).
      Thanks.
×
×
  • Create New...