- 0
-
-
Similar Topics
-
By OliverRC
Up until a few days ago my TV and AVR have been working perfectly since I bought it.
Zero hassles with HDMI and connectivity.
Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
I’ve tried:
Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
Marantz SR5015 Nvidia Shield Pro PS5
The setup is the conventional AVR installation as shown in the attached file
Has anyone else experienced this?
Is it possible to revert the software update?
-
By FranzBittner
I received an update 05.40.45 for my LG 65UM7510PLA TV a few days ago. After I tried to edit the channel list with the ChanSort programme, I noticed that the channel list transferred from the TV to USB was greatly reduced.
This was not a problem with the previous version 05.40.20. Unfortunately, it is not possible to upload the old version via USB.
-
By ironmonkey
Just bought an LGLED-65UJ630 65INCH TV. Right away I started to get the message "This app will now restart to free up more memory". After searching the internet and forums, I now understand that this problem is huge, it has been going on for years now and it is right across many models of LG TV's.
I have tried everything to fix this problem. It has the latest firmware. I did the factory reset and that lasted 4 hours before I got the message back. I turn off the TV and leave it for 10 minutes, maybe one hour later I get the message. I delete browsing history, maybe 10 minutes and I get the message..... you get the message.
As I understand it, the problem is that LG TV's don't have enough internal memory, but they have shipped a ton of their "smart" TV's with this problem.
My question is, has anybody heard anything from anybody, anywhere about a solution to this problem. I really want to keep this TV, but it is not fit for purpose in this state.
-
By Stephen Davies
As above! All4 & My5 will no longer work. Also, how do you update the browser? My LG nano TV is just over 3 years old.
-
By Brendank
I had an issue with powering on the tv in which pressing the lg power button on the first ocassion did not turn on my Oled C1 77 inch Tv.
LG replaced the powerboard, however since the replacement I have an issue with intermittent audio dropouts via earc.
EARC has functioned previously on my Tv when connected to an Anthem 710 receiver and for a few months now on an Anthem AVM 70.
The set up has remained the same in terms of audio settings, passthough, match screen and sound set to bypass and I have tried multiple cables, switching the tv off, resetting earc, but I still have the issue.
It is very odd that after a replacement power board I have this issue. It almost seems like a comparability issue between the new board and the existing components or something else is wrong with the TV.
Any ideas?
-
-
Question
Ceapa Adrian Emil
Hi guys! I have a 55QNED81QA and my question is this:
After software update, how do i restart the webOS without unplugging the TV from outlet ? I don't see a restart option in the menu !
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.