Quantcast
Jump to content

LG OLED C8 TV with Soundbar connected to HDMI ARC port the Volume Control Percentage missing just + & - control

Jim Brown
 Share

Recommended Posts

Jim Brown Newbie

Jim Brown

Posted
Posted

I have a LG OLED C8 TV with a Soundbar and when connected to Optical the Volume Control is normal with a Percentage 0% to 100% but when connecting to HDMI ARC port like the Soundbar suggest to be connected it just show + or -,  you don't have anyway of knowing what the volume is set  to.    I have tried two Soundbars a LG LAS551H that was connected via Optical and when connected to HDMI ARC it also does not show Volume Control.  I have  got a new Sonos Beam Gen 2 that is now connected to HDMI ARC port and sounds great but if I connect it to Optical it's much lower in volume but has the Volume indicator.   Please advice.    

I would like to suggest three enhancement request: 1. to show Volume Percentage on the HDMI ARC port.  2. Optical and HDMI ARC have the same output and 3. the Sonos be added to the Device list under Soundbars. 

Thank you, 

Jim Brown 

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Popular Now

  • Similar Topics

    • John Bizeray
      Popup messages: Wired Lan cable disconnected / Wired network is connected
      By John Bizeray
      I recently updated the firmware on my  LG43UH610V.  Now I constantly get "Wired Lan cable disconnected" / "Wired network is connected" messages even while watching a video file from my NAS. The TV is connected and using the network while getting these messages. It has always been on a fixed IP address on the LAN.
    • starwoodtech
      HDMI ports are automatically switching between each other.
      By starwoodtech
      I have a 65 Inch LG OLED evo AI C4 4K Smart TV 2024 - Model OLED65C4PUA.ACC. here have been a many weird things happening. This is one of them:
      I have 2 HDMI 2.1 cables attached to a Rogers Internet TV unit (HDMI 4) and the other 2.1 cable plugged into an XBOX Series X (HDMI 3). If the TV is on an HDMI 4 is active, and I turn on the XBOX (HDMI 3), the TV begins to swtich back and forth constantly and never ends until I turn off the TV. It will automatically switch itself from HDMI 4 to 3, then 3 to 4, then back to 3 again non-stop.
      If I power off the XBOX, this behaivor stops.
      Would anyone know why this does that? Is this a software or hardware problem? I tried to describe this to LG Support but they had no answers.
    • jikhead
      HDMI ARC - Audio Out Not Working (Again)
      By jikhead
      I'm not getting any audio from the apps via the HDMI via ARC connection to my receiver.  This occurred two weeks ago and was unable to resolve it, but ironically there was new firmware released that same day for my B6 (3/31/17) and this fixed the issue.  However, now I again can't get it working after a TV reset and tinkering with the audio settings again.  I tried to load the firmware again, but it appears this is not possible to forceable load the same firmware.
    • Dscottbellamy
      LG Soundbar SN6Y volume going down after 30 minutes
      By Dscottbellamy
      how can I fix lg soundbar model sn6y volume automatically going down after exactly 30 minutes if resetting, unhooking volume down button, drilling vent holes near motherboard, and running a cooling fan did not fix the problem. 
    • bohatier
      HDMI Input not working after quiting YouTube app
      By bohatier
      Hi,
      I believe it started to happen after last update - version 03.53.45, maybe the one before. After I quit YouTube app, TV will not get signal from HDMI settopbox no matter I try. Only solution is to unplug and plug back HDMI cable which is really annoying. Is it known issue? Is there any fix? I tried few workarounds, like disabling smart features and so on, but no luck.
      TV model: OLED55B13LA
      Example:
      Settopbox is powered on, TV is showing signal over HDMI, everything is fine. Then I open YouTube, after some time exit, switch back to HDMI input of settopbox and TV says no signal. I re-plug cable and then it works fine.

WEBOS FORUMS

MORE SECTIONS

FOLLOW US ON

×
×
  • Create New...