Quantcast
Jump to content

  • 0

Issue with Aha ott app


ganesh chowdary Simhadri

Question

3 answers to this question

Recommended Posts

  • 0

Hi Ganesh,

Since you have mentioned, only Aha app is getting stuck, I guess your internet speed is good as other streaming app are fine. So, it could be problem with the Aha app, may be a fresh installation can help you, here are the steps you can try

  • Uninstall the Aha app in your LG Smart TV.
  • Log-in to your Aha account either with mobile app or web browser (not in the TV).
  • Navigate to 
    link hidden, please login to view
     and remove clear all the instance of lgwebostv and any other instance that you think are not necessary. 
  • Re-install the app in you LG Smart TV.
  • Link the account and hope it resolves the issue.

Fallowing these steps helped me resolve another issue for me, previously.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Debojit Kundu
      Hi I recently updated the software to 5.30 version, and after that I noticed a weird problem with video streaming, in general issue with internet bandwidth. Usually my b/w is ~35 mbps so that is sufficient for 4k streaming on youtube or netflix. The issue is after running for 10-15 mins if I pause the video or go backward the network speed is thrashing badly. For example when I check internet connection on netflix it shows ~30-35 mbps, but whne that problem occurs and I check the speed again I see the speed is dropped to <1mbps. Same with youtube, it can't load 4k videos anymore as the speed is ~1mbps. I can realize the problem as the thumbnails load very slow with scrolling. This problem does not get away unless I restart the TV or disconnect from wifi AP and connect back. The router always works fine I mean when I observe the problem on tv I can run videos on mobile seamlessly and see a speed of ~40 mbps on the same router. The router is kept next to the TV so I don't think it is some issue with wifi distance etc. I don't know what to do. I tried resetting but it removed all my app but it was actually not a so called "factory reset". So software version remained same. To rule out hardware problem I want to revert to previous version of the software but apparently I can't downgrade the software. Is there any other approach to load some previous version firmware?
    • By Daniele
      Good afternoon everybody !
      I live in Italy and I own an LG 49UF851V that I haven't used for years.
      Being a non-Italian model with hbbtv support (which in Italy was not yet enabled in 2016), years ago, I had changed the code area to 3124 to enable the MHP protocol.
      Now, in 2023, after having set the code area to 3122 (I don't remember the original one, I think it was Polish) and having correctly updated it (firmware 04.06.25.01) I am trying in every way to enable hbbTV for Italy without success , despite the technical specifications indicating that it is compatible.
      By selecting "no country" in the localization menu, the hbbTV option appears regularly activated in the channel settings and, for example, when I tune to Mediaset channels, the hbbTV icon appears in the info banner but in reality it does not start.
      Beyond this, obviously, the channel list is not according to Italian law and there are no Italian APPs in the Content store.
      Searching the web I notice that the uf851v is practically identical to the uf850v and the uf852v except that it seems to be intended for a non-Italian but still European market.
      Is there any way to solve it?
      I thank you in advance and wish everyone happy holidays
    • By Matan Faragi
      Hi,
       
      I'm not sure its the right place but at any case i will describe my issue here and maybe you will be able to help:
      Recently I bought a a TV and a sound bar, and i have some issue from the moment i get the TV.
      TV model - LG 55LB679Y with latest firmware version i have at my country (Israel) - 04.30.16
      SoundBar - LG NB4540
      the TV connected to sound bar by "wireless simplink" feature 'LG TV' and TV connected to My Wireless router.
      every 5 - 15 minutes, i have sound drops / Cutoff / stooped / Interruption, seem like the TV loose connection to sound-bar for few seconds or something similar, it's happen from any AV source im using HDMI, USB...
      and the local re-seller replace the sound-bar to a new one (same modal off course) and i didn't help.  
      i have try to troubleshot the problem in the last few weeks - but didn't succeed to solve it, and also the support / costumer service didn't have solution for this.
       
      some steps i take when troubleshot this issue:
      * different wireless configuration on router -  different channels, SSID, Security - issue still persist.
      * another wireless router - issue still persist.
      * working with optical cable to sound bar - just for testing - working ok, but i need the wireless feature working this the reason i bought sound bar and TV from the same manufacturer.
      * disconnect the TV from wireless network - looks like it's working ok, but didn't had chance to test it for long time.
       
      from my point of view looks like it's issue with wireless device on TV not able to to work in parallel with soundbar and wireless network for some reason, It could be caused bysoftware issue on WebOS or Hardware issue with this TV model.
       
      I really hope you be able to help me or throw some light on this case.

      Kind regards,
      Matan
    • By Fabulos47
      I have an Onkyo TX-NR6050 connected to a LG OLED77C2PUA using a high speed HDMI cable.
       
      When the TV is tuned on the Onkyo comes out of stand-by mode. The volume control on the LG remote is able to raise and lower volume control on the receiver.  The LG has a connection to the Onkyo but the LG is not passing any data.
      If the receiver is out of stand by mode (by either turning the receiver on first or turning the TV on --> off --> on) then there is a data connection and sound can be heard.
      The issue seems to be in the timing of the handshake between the two devices. The LG has no problem turning on the onkyo but whether the data connection is established is based on the receiver being out of stand by mode first.
      I tried everything found on line from changing HDMI connection type form Auto, PCM, and pass through. I have tried disabling the quick start from LG setup.
      It is very annoying considering the amount of money invested into a setup that is suppose to be eARC 2.1.  I should not have to use the home theater remote.
      Any ideas?
       

    • By rupy911
      Good evening everyone, Since yesterday I have a problem that is driving me crazy. I have the smart TV in question and I can practically no longer see any content from any platform except YouTube, let me explain. If I open Netflix I see everything correctly but when I launch any content the TV loads up to 20-25% then gives me an error stating that that content cannot be played. Same problem with Disney+, the app tries to load any video then gives me an error, try again, same thing with Amazon prime. Basically only YouTube works. I'll list what I did: - Fully updated TV, fully updated apps - I unplugged and waited, nothing - I reset to factory settings, nothing - I changed 3 different networks, two wifi and one wired, changed 3 different DNs, inserted manual IPs, put back DHCP, nothing - I uninstalled and reinstalled the apps, nothing. The network works because the TV runs all the tests and is connected stably to my fiber. It's a problem that not even LG support can tell me about. I don't know what to do anymore, all that remains is to think of a firmware/hardware problem. Can you give me some advice? Thank you Roberto
×
×
  • Create New...