- 0
-
Popular Now
-
-
Similar Topics
-
By OLED65G56LS
LG OLED65G56LS – I want to turn off the commentator's audio during a football match but keep the stadium sound.
-
By yosis
Hey All,
I have google TV which connected with HDMI to my LG
It worked perfectly first few days and I was able to fully control the TV with remote
It suddenly stopped working yesterday and i cant contol the tv from remote of the google tv
I did factory reset to google tv but didn't help
I do see that controlling enabled both on tv and streamer but still dead. Any ideas?
-
By chris7ben
The sound and picture are out of sync when screen mirroring from my iPhone 16 Pro to my LGQNED70A6A TV, using the internal speaker. I have tried all the recommended tips in the settings to cure the issue with no success. However, when I isolate the TV from the mains supply for 60 seconds and restart it, the syncing issue is cured but degrades after a day or so. My iPhone software is up to date and there is no firmware upgrade available for the TV. My LinkSys router has a full fibre connection. The only connection into the TV is the mains supply. Any help much appreciated. Thanks in advance.
-
By hjetschko
Hi, I have a feature request for the sound out setting. I often connect my Bluetooth headphones to the TV. We don't use the internal speaker of the TV, we use the optical sound out setting whenever I don't use Bluetooth. It would make our lives a lot easier if the TV can remember the last sound out setting before connecting to Bluetooth and default back to this setting when the Bluetooth device gets disconnected. At the moment, each time I disconnect the headphones I have to go back into settings and change the sound out setting from internal speaker to optical again.
Thanks and regards
Hubert
-
By John Peet
TV is a week old and the internal speaker has stopped working when in HDMI ARC + internal speaker sound output mode. The internal speaker itself works fine when in “internal speaker” sound output mode. I’ve checked all the settings that I can and can’t find anything that would correct this issue.
-
Question
cb4332
Hi guys, I have an older received (Arcam AVR300) that only support optical input, so I was able to add it manually via Connected Devices, and can control the volume and mute, however I can't turn it off quickly (can only do it via the "..." button and selected sound bar and then power). This work, but is it possible to map this to lets say the top box on/off button or even some other button? Maybe even some cable I would but to make this work. The old remove is dead so I need a way out and the receiver is old and I don't want to keep it on always. Thanks
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.