By C C
[Feature-Request] Set power on to last HDMI input
Not sure if this feature request would be part of LG webOS or would require changes to some lower level control software for my TV.
But... It seems that every time I switch it on, it seemingly randomly selects a HDMI input, I mostly use the same HDMI input so I wanted to ask for a feature request in the next software update that makes the TV remember the last selected HDMI input so I don't have to keep manually selecting it.
In addition, maybe a second option in the TVs settings that can auto select the input based on there being an input signal or not, that might be useful for people that switch devices allot.
By John Bizeray
I recently updated the firmware on my LG43UH610V. Now I constantly get "Wired Lan cable disconnected" / "Wired network is connected" messages even while watching a video file from my NAS. The TV is connected and using the network while getting these messages. It has always been on a fixed IP address on the LAN.
By Den C
LG50UK6950. The programme guide is slow to load, and has to re-load for each page. My previous LG tv (a 49UK.....) was the same.
Samsung, Panasonic, Toshiba and Sony are almost instantaneous.
Is this a hardware problem, eg lack of memory, or software - in which case is it ever going to be fixed?
First, I have search other forums and documentation. Haven’t found a solution.
I am not asking about an AT&T TV app. I know there is not one at this time. I’m talking about the service provider that is specified in webOS. This is what is used by Lists and Guide to show current broadcast television. The closest service provider listed is AT&T U-verse, which is not AT&T TV. Btw AT&T TV Now is also not on the list but also is not AT&T TV either. Without the correct service provider I get wildly incorrect broadcast information. Is there a work around or any plans to add AT&T TV to the broadcaster list. Again, I am not talking about an app. I am talking about the broadcaster list.