-
Popular Now
-
Similar Topics
-
By orgullodemexico
I'm having an issue with my LG TV & LG Sounbar setup
LG UJ6200 TV software 6.10.55
LG soundbar 33217
ISSUE: All sound effects EXCEPT movie sound muted, requiring more volume to listen than MOVIE sound effect for live TV and Internet Streaming
TV AUDIO SETTINGS: Sound out ==> Audio Out (optical/HDMI ARC)
Digital Sound PCM
Simplink: ON
I unplugged the sound power, pressed the power button for 60 seconds ==> no effect
I pressed the volume down button on the sound bar while pressing sound effect on the remote for 60 seconds ==> No effect, did not get reset message.
-
By mesplint
I have a LG 65QNED92AUA tv that has issues with the Bluetooth connection dropping off when connected to my earbuds. I believe the issue to be software related. LG has sent 2 technicians out to repair and the first technician changed the main board and Bluetooth transmitter which did not resolve the issue.
There are similar issues with Bluetooth Connection from others.
Since hardware replacement didn’t help and this is a known software-pattern issue, I would like push LG to specifically address it at the firmware/webOS level. I am unable to escalate to their software team and check if there’s a known patch or beta firmware for the QNED92 line.
For some reason this line of questioning is not available with in LG customer service.
Please help!
-
By Webos-developer
Hi LG team,
We are facing playback issues on LG 2024 and 2025 tv models when we try to play AAC audio content. The content starts playing but after a few seconds it pauses. We have tried with WebOS native player as well as Shaka Player and the behavior is same. We can play the aac audio content on tv models older than 2024.
Tv model used:
LG -2025
Model no - 43UA83006LA/2025
Type- ultra HD/4kTv
LG webOS- (10.3.1)
-
By Fredrik Andersson
Hi,
I have a OLED77C34LA and a pair Bose QC32 II headphones and I have trouble connecting to the tv.
First the headphones works good on my other three devices but the TV has trouble, when I manage to connect they work perfect but when I turn the off on on again the headphones will say they are connected to the TV but the TV most of the time won't give me an option to connect and I remember I got a popup asking if I wanted the use the headphones as output but only for like 3-4 times so far.
Usually I have to plug the power out of the TV for a while and remove the bluetooth device but and it doesn't always work. It's not great spending like 15min to get the headphones to work.
Any ideas what could be wrong?
-
By hjetschko
Hi, I have a feature request for the sound out setting. I often connect my Bluetooth headphones to the TV. We don't use the internal speaker of the TV, we use the optical sound out setting whenever I don't use Bluetooth. It would make our lives a lot easier if the TV can remember the last sound out setting before connecting to Bluetooth and default back to this setting when the Bluetooth device gets disconnected. At the moment, each time I disconnect the headphones I have to go back into settings and change the sound out setting from internal speaker to optical again.
Thanks and regards
Hubert
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.