- 0
-
-
Similar Topics
-
By Jibun no Kage
Brand new LG TV (WebOS 8x) WILL NOT stay off when turned off with the remote? Out of the box, connected to internet, seems to have been updated, and working fine. But when I hit the power off with the remote, the TV reports 'Life is Good' seems to turn off, i.e. go into standby, and then a few seconds later, turns back on. If the device connected to the TV on the last active HDMI port is OFF, I get the No Signal warning. So I know the active HDMI input is not generating any signal. I want to believe that any other device on any other HDMI port might be an issue? But then the TV would switch to that HDMI port, no? This is really an issue! If I use the phone app I can turn off the TV and it seems to stay off, at least does not come back on in a few seconds like the remote? If I send 'standby' via HDMI-CEC, that seems to work as well, the TV seems to stay in standby mode. This a bug?
-
By margorjon
Hello, I would like to get our new TV to show the home screen at startup instead of a Rakuten channel were never interested in.
I have set the settings to show the home screen at startup yet it's still not working, at startup were still only getting Rakuten...
-
By Jibun no Kage
Asking this hear, since I could not seem to find a better place... Wake on LAN only works for a few minutes after TV is turned off? If I turn of LG TV (WebOS 8.x) and then send a Wake on LAN (WoL) packet, it works. If turn off the LG TV, then I wait about 15 minutes or so, then send the same WoL sequence, using the same code, script, etc., it fails, the LG TV never turns on. THe LG TV is configured both for wired ethernet (preferred) and WiFi. Any idea why this behavior? It almost seems like the LG TV goes into standby, via phone app, remote, even CEC, etc., then drops from the network? Mobile is enabled on the TV, hence the phone app works. Why would the LG TV stop responding to WoL packets?
-
By Mike Cass
So I've probably pressed something on the remote to cause this, but if I switch channels to say BBC1, the channel name banner will stay on the screen instead of disappearing. Holding the back button makes it go away, but don't want to do that all the time. Any ideas?
-
By 152bobby
I have been trying to get my Google Home and Nest Audio Speakers to turn my LG OLED65C24LA TV on and off. I have linked ThinQ to Google Home but it still wouldn't work. So plan B was to get a Chromecast to do this one simple voice activated request....I have no intentions of using Chromecast for anything else!
So this actually does work, however, when asking it to turn the TV on, it defaults to the home page of Chromecast TV, I want it to just open to my normal TV system, which is Sky Q. Ideally, I would like to disconnect the Chromecast and just get Google Home and ThinQ to do this !!
I have checked every setting and trawled the internet for a solution. I've posted on the AV Forum in the UK and the Google Forum and I'm waiting on a call back from LG Support UK.
I expected this to be a VERY simple task !!
Can anyone help with this ?
-
-
Question
WynQat
I have on several occasions turned my TV off, upon leaving the house and returning to it blaring away on some random channel on YouTube! What would be the cause of this? Is there a way to turn it "OFF" off and not just standby mode?
Second question: What type of keyboard could I use for my TV and how does one install it so the TV picks it up? I hate using the on-screen unit!
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.