LGWEBOS signange - Application gets hung and issue with regional news
-
Popular Now
-
-
Similar Topics
-
By orgullodemexico
I'm having an issue with my LG TV & LG Sounbar setup
LG UJ6200 TV software 6.10.55
LG soundbar 33217
ISSUE: All sound effects EXCEPT movie sound muted, requiring more volume to listen than MOVIE sound effect for live TV and Internet Streaming
TV AUDIO SETTINGS: Sound out ==> Audio Out (optical/HDMI ARC)
Digital Sound PCM
Simplink: ON
I unplugged the sound power, pressed the power button for 60 seconds ==> no effect
I pressed the volume down button on the sound bar while pressing sound effect on the remote for 60 seconds ==> No effect, did not get reset message.
-
By Webos-developer
Hi LG team,
We are facing playback issues on LG 2024 and 2025 tv models when we try to play AAC audio content. The content starts playing but after a few seconds it pauses. We have tried with WebOS native player as well as Shaka Player and the behavior is same. We can play the aac audio content on tv models older than 2024.
Tv model used:
LG -2025
Model no - 43UA83006LA/2025
Type- ultra HD/4kTv
LG webOS- (10.3.1)
-
By SNiPpy YiPpy
Hello all,
I believe this problem started after i accidently started and immediately cancelled the download of a app. After this I am unable to install or update any app evem after resetting to initial settings.
This should be the exact problem found here https://www.lgwebos.com/topic/1918-because-i-can however the solution seems to require a new update. Help?
-
By RCMiller
Greetings,
I'm hoping someone can assist with a problem we're experiencing while running a Next.js based web application on WebOS.
Our Configuration:
Display: 43UM5N-E UHD Signage Display (43" LCD)
WebOS version: 6.0.0-124 (libertyspikes-lager)
Next.js version: 16.0.3
React version: 19.2.0
We have built a web application using Next.js and React. It is hosted on an IIS server running on our local network. The display is connected to the same network and we have verified connectivity with the web server. Our application is not a native WebOS app, but rather, we are using the Play via URL option to display the web site when the display boots up.
Attached is an image of the errors captured while running in the WebOS 6.0 simulator. These errors happen immediately after the application starts.
Based on our research, the embedded version of Node.js on this display is 8.12.0. On newer versions of the simulator (v22 and above), the application loads fine and no errors occur. It seems there are JS incompatibilities between the newer Next.js framework and the version of JS build into this display.
Questions:
1. Can the embedded JS version of the display be upgraded, and if so, how?
2. Is there any other possible workaround to get this application to load? It runs fine on regular browsers and reverting back to an older version of Next.js or re-writing in plain JS is not an option for us.
Any suggestions or help is appreciated!
Thank you,
Bob Miller
-
By hjetschko
Hi, I have a feature request for the sound out setting. I often connect my Bluetooth headphones to the TV. We don't use the internal speaker of the TV, we use the optical sound out setting whenever I don't use Bluetooth. It would make our lives a lot easier if the TV can remember the last sound out setting before connecting to Bluetooth and default back to this setting when the Bluetooth device gets disconnected. At the moment, each time I disconnect the headphones I have to go back into settings and change the sound out setting from internal speaker to optical again.
Thanks and regards
Hubert
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.