I have an LG OLED TV and LG sound bar. After this morning’s LG TV software update, there was no sound. I have tried all the reset options listed online, to no avail. The TV remote will not turn the sound bar on, but it will turn it off. Still no sound. If I connect the sound bar with an optical cable, I can get sound but can’t power off the sound bar when I use the TV remote to turn off the TV. Everything worked fine until the update, so this is an LG problem. Can I fix it?
By Vincent Valot
We are a company developing streaming apps for our customers. As-to enhance developer / tester / any other teams experience into LG universe, and be able to quickly test any environments we have (dev / staging / production), we'd like to be able to install apps that aren't removed after Developer Mode expires, or aren't visible/listed to the public store.
We looked upon the idea to extend Developer Mode session with a Crontab with specific accounts for each TV, but some TVs are stopping the Developer Mode when being powered down, so it doesn't seem the most industrialised idea.
Let me know what we can do to answer that issue !
By Justin Tan
Found multiplex application that use letsencrypt stop working in 30 September 2021 on LG WebOS 3.5. This appear to be wide spread multiplex version of WEBOS.
link hidden, please login to view As PLEX blaming to be LG fault. LG please provide solution to only 2 year old TV
Our current app is available on 4K/UHD LG television models running the following system software:
webOS 3.0 webOS 3.5 webOS 4.0 webOS 5.0 No 720p or 1080p (“full HD”) sets are supported for our current app at this time.
Note: Due to root certificate limitations with the device OS itself, only webOS 5.0+ devices support secure connections with a personal Plex Media Server. To allow connections to a personal server, devices running earlier webOS versions must be set to Allow Insecure Connections in the TV app settings and the Plex Media Server must be set to Preferred for the Secure Connections preference.
By Vanilton Coelho
Recently bought one 49LF6350 and one 43LF6350 and the two models have the same problem, whenever I try to open an application, informs me that I have to update (required update, you must update this app to launch it. the update may cause data to be stored deleted.), and when I try to update, it gives an error message (application has not Been instaled. try again). It happens to apps also store to at new install. what may be occurring?
software version: 3:03:04
WebOS TV version: 2.0.2-3928 (behive-badlands)
LG OLED C8 TV with Soundbar connected to HDMI ARC port the Volume Control Percentage missing just + & - controlBy Jim Brown
I have a LG OLED C8 TV with a Soundbar and when connected to Optical the Volume Control is normal with a Percentage 0% to 100% but when connecting to HDMI ARC port like the Soundbar suggest to be connected it just show + or -, you don't have anyway of knowing what the volume is set to. I have tried two Soundbars a LG LAS551H that was connected via Optical and when connected to HDMI ARC it also does not show Volume Control. I have got a new Sonos Beam Gen 2 that is now connected to HDMI ARC port and sounds great but if I connect it to Optical it's much lower in volume but has the Volume indicator. Please advice.
I would like to suggest three enhancement request: 1. to show Volume Percentage on the HDMI ARC port. 2. Optical and HDMI ARC have the same output and 3. the Sonos be added to the Device list under Soundbars.