Hi to all!
I'm really new into this and have a problem. My 2018 LG 55UJ635V-ZF has only webOS 3 (latest; ethernet-automatic download) an i can't use airplay or miracast. The apps i found in the store for mirroring are only pay2use to use this needed feature for me.
On the LG Homepage i can't find an upgrade for my TV an maybe is my tv really to old for upgrades or am i wrong?
Maybe someone can help me out or bring some light for me in this.
I also found the suggestions on this site for the firmware 4.70.70 (for the UJ's), but i can't download....error.
sorry for my bad english 🙂
thx for your help, quartex.
LG C2 Oled Connected to Samsung HW-Q800B Soundbar: Sound delays to respond during movie pause/unpause on TV streaming Apps like Netflix and Prime Video when sound output is set to PassthroughBy GiotisCy
I have recently purchased an LG C2 Oled TV which I connected with my Samsung HW-Q800B 5.1 soundbar via eArc HDMI. When I select "Passthrough" as a Digital Sound Output on LG TV sound advanced settings, there is an obvious sound response delay around 3 seconds when I pause and unpause the movie on Netflix or Prime video streaming apps on LG TV. For example, when I start the movie, the video starts and sound starts 2-3 secs later. When I pause the movie, the sound continues for 2-3 secs after the video has been stopped. There is no any lip sync issue, just this response delay of the sound from the soundbar. This happens only on LG TV Apps. If I connect to an external HDMI device such as AMAZON Fire Stick 4K, there is no such sound delay issue neither on Netflix neither on Prime Video.
Thus, the problem seems to be on LG TV apps.
If I change the Digital Sound Output to "Auto" instead of "Passthrough" the issue is gone but sound quality is not as good as with Passthrough selected. So I do not want this to be my option.
I would appreciate if someone could come with a solution on this.
I output the sound from my LG 75UJ657A to external speakers through a bluetooth connection, but it doesn't automatically connect to the bluetooth device when I turn the TV on. Whenever I cycle the TV off and, then, back on, the TV asks if I want to connect to the bluetooth device, and I have to select "yes" with the remote. My smart phone automatically connects to all the bluetooth devices I've set it up with. When I start my car, my phone connects automatically to the car stereo/phone system, and it does the same with other bluetooth speakers I have. This is what I want my TV to do.
How do I get my LG 75UJ657A to automatically connect to the bluetooth device I've set up with it?
Hi - My LG television is currently being bombarded by my toddler messing with the physical control panel, mainly for the volume. Separate to this, I always like to have an Android-enabled remote as I don't always have the physical remote at my side.
As I did with my old Samsung television prior to upgrading, I disabled the physical buttons on the television using Hotel Mode. I did it on my LG and it was perfectly fine... Until I went to use the LG ThinQ Android app. What followed was days of head scratching why suddenly my LG app was not working - In the end because a few days had passed, my toddler wasn't interested in the non-working physical buttons, I decided to play around with the Hotel Mode - This is when I found that there was a direct conflict between the Android app and Hotel Mode being enabled.
I tried on a different phone with the same results. However toddler has once again realised the physical buttons work - So in the process of pulling out my hair. I did have another remote app which worked well on my Samsung television, but LG seemed to have nixed it on support so I cannot use the third party app.
Is there a light at the end of the tunnel??
Při sledování Smart TV LG s android boxemTesla se mi často vypíná obraz (problikne) a v rohu se objeví HDR. Nevím si rady v TV to nejde zakázat tak už opravdu nevím?? Kabel?? Mohl by mi prosim někdo dát někdo poradit co s tím?? Děkuji.