Is it possible to run a script on power on TV? i.e. We want that TV stays in a site browser on power on.
Any help would be appreciated
When i start my tv it boots up at HDMI 2 ARC which is the last one used and the one I want to use (Sound bar/apple tv connected), but then the tv changes to HDMI 4 and I don't understand why because there's nothing connected to it. It does this every time. I start my tv via my apple tv remote. Is there a way to force HDMI 2? Set it as default?
LG OLED C8 TV with Soundbar connected to HDMI ARC port the Volume Control Percentage missing just + & - controlBy Jim Brown
I have a LG OLED C8 TV with a Soundbar and when connected to Optical the Volume Control is normal with a Percentage 0% to 100% but when connecting to HDMI ARC port like the Soundbar suggest to be connected it just show + or -, you don't have anyway of knowing what the volume is set to. I have tried two Soundbars a LG LAS551H that was connected via Optical and when connected to HDMI ARC it also does not show Volume Control. I have got a new Sonos Beam Gen 2 that is now connected to HDMI ARC port and sounds great but if I connect it to Optical it's much lower in volume but has the Volume indicator. Please advice.
I would like to suggest three enhancement request: 1. to show Volume Percentage on the HDMI ARC port. 2. Optical and HDMI ARC have the same output and 3. the Sonos be added to the Device list under Soundbars.
Recently, My LG OLED TV Not able to play video.
POP-UP on TV screen.
"The media could not be loaded, either because the server or network failed or because the format is not supported."
Note: Believe the server and network have no issues.
Anyone can help resolve this issue?
Thank You in advance.
By General Plot
Hi. I have an LG OLED TV that I originally bought while living in the UK. Specifically, it’s model OLED65B8SLC. When I relocated back to the US, I shipped the TV home as well. I’ve since picked up a service remote and changed my original country code of 3123 (UK) to 1792 (US). Oddly, while everything else seemed to update just fine, it still shows HW settings are EU, despite the location in the menu as now showing as the US. Also, the continent index is 0, when I know it should be 10. This leads to no broadcast country being shown in the location menu. I’ve tried every US country code from 1792 to 1919, and none of them seem to change this. Are there any other possible US country codes anyone might know of worth trying? I’ve attached photos of my current location menu, along with how it looked before. Thanks.