- 0
-
Popular Now
-
-
Similar Topics
-
By mesplint
I have a LG 65QNED92AUA tv that has issues with the Bluetooth connection dropping off when connected to my earbuds. I believe the issue to be software related. LG has sent 2 technicians out to repair and the first technician changed the main board and Bluetooth transmitter which did not resolve the issue.
There are similar issues with Bluetooth Connection from others.
Since hardware replacement didn’t help and this is a known software-pattern issue, I would like push LG to specifically address it at the firmware/webOS level. I am unable to escalate to their software team and check if there’s a known patch or beta firmware for the QNED92 line.
For some reason this line of questioning is not available with in LG customer service.
Please help!
-
By MNW
I've had Universal Control via the smart remote sucessfully controlling the audio (volume) for my LG OLED 48C1LB tv via my Sherwood RD-6118R amp for a while now; But following a power cut, the remote no longer controls the amp/tv volume?
The audio IS still being played through the amp using the optical OUT/IN but I have no control of the volume
I've removed and re-initialised the settings for this amp in Universal Control Settings but following the "success" message, the remote does not control the volume on the amp/tv.
What am I missing?
-
By Dscottbellamy
how can I fix lg soundbar model sn6y volume automatically going down after exactly 30 minutes if resetting, unhooking volume down button, drilling vent holes near motherboard, and running a cooling fan did not fix the problem.
-
By chris7ben
The sound and picture are out of sync when screen mirroring from my iPhone 16 Pro to my LGQNED70A6A TV, using the internal speaker. I have tried all the recommended tips in the settings to cure the issue with no success. However, when I isolate the TV from the mains supply for 60 seconds and restart it, the syncing issue is cured but degrades after a day or so. My iPhone software is up to date and there is no firmware upgrade available for the TV. My LinkSys router has a full fibre connection. The only connection into the TV is the mains supply. Any help much appreciated. Thanks in advance.
-
By KKTPA
I have a Denon AVR hooked up to the HDMI 2 input on my LG tv. When I initially set it up, I was able to control the volume of the Denon receiver by using the LG remote. I enabled CEC Simplink and eARC on the TV and this allowed me to not only use the volume but also turn the receiver on and off automatically with the TV. Recently, my LG tv installed a software update and ever since that point, the TV reverts to TV Audio instead of HDMI 2 every time I turn the TV off and back on again. I then have to change the sound setting to HDMI and the volume control works perfectly.
Any tips? I already tried unplugging everything including the HDMI cables, turning CEC and eARK off and back on again, and reverting to all original settings but nothing seems to work.
My Denon receiver does not have eARC support, not sure if that matters but I'd love to know the best way to set it up to control volume through one remote.
-
Question
JohnB
Hi
I have an a 49UH850V TV with SH7 sound bar and 2 x H3 speakers.
When I turn the system on the H3 rear speakers go to high volume. The only way I can adjust this is either through the app or on the H3 speaker volume control direct. If I turn the TV off and on again it returns to high volume setting.
Also the sub woofer seems to have a mind of its own and will sometimes crackle and pop. And I think the overall sound level is unstable.
I am using the internal Freeview receiver so there is no external conflict
LG have changed the TV main board.
I have now run the "wireless" H3 speakers on a wired network as they were unstable even with a LG sound bridge and I tried all the available frequencies!
All the firmware is up to date.
If I run the output from the TV via optical I get the volume issues but the AV sync on the TV works (and I have tried different optical cables). If I use Bluetooth the volume issue goes away but the AV sync is greyed out so I can't get the lip sync correct. (it needs to be on -5, If I use the AV sync on the soundbar it only goes +ve!). I can't get it to work on the HDMI ARC socket at all.
I have had both the LG support and the retailers support (Currys) looking at this and everybody seems to have drawn a blank.
Any ideas???
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.