- 0
-
-
Similar Topics
-
By Jibun no Kage
Brand new LG TV (WebOS 8x) WILL NOT stay off when turned off with the remote? Out of the box, connected to internet, seems to have been updated, and working fine. But when I hit the power off with the remote, the TV reports 'Life is Good' seems to turn off, i.e. go into standby, and then a few seconds later, turns back on. If the device connected to the TV on the last active HDMI port is OFF, I get the No Signal warning. So I know the active HDMI input is not generating any signal. I want to believe that any other device on any other HDMI port might be an issue? But then the TV would switch to that HDMI port, no? This is really an issue! If I use the phone app I can turn off the TV and it seems to stay off, at least does not come back on in a few seconds like the remote? If I send 'standby' via HDMI-CEC, that seems to work as well, the TV seems to stay in standby mode. This a bug?
-
By taildeman
My Smart TV LGwebOS TV OLED55 B8PLA with software version 05.50.15
It is impossible to install some apps for regional TV channels because the browser is incompatible. How do I update the browser or how do I install a different browser on my TV ? Downloading a file is not supported. Automatic update is active. Thanks in advance.
-
By woof
I have a couple of LG OLEDs in shared spaces, with external speakers, one via optical and the other via analog jack (confusingly named headphones). Whenever bluetooth headphones are used and then disconnected, the TV reverts to "internal" terrible audio. For non-technical people this is permanent. Do I have to train everyone to select the device from the long list or can I set a default?
-
By bogeyman62
Has anyone been able to run Screen Share from a Windows 10 PC? Mine will not connect to the LG TV.
-
By Jibun no Kage
Asking this hear, since I could not seem to find a better place... Wake on LAN only works for a few minutes after TV is turned off? If I turn of LG TV (WebOS 8.x) and then send a Wake on LAN (WoL) packet, it works. If turn off the LG TV, then I wait about 15 minutes or so, then send the same WoL sequence, using the same code, script, etc., it fails, the LG TV never turns on. THe LG TV is configured both for wired ethernet (preferred) and WiFi. Any idea why this behavior? It almost seems like the LG TV goes into standby, via phone app, remote, even CEC, etc., then drops from the network? Mobile is enabled on the TV, hence the phone app works. Why would the LG TV stop responding to WoL packets?
-
-
Question
jebIV
Have a company website up in the web browser. Have no screen timeout set, but every 2 to 3 hours the screen just turns to snow and then eventually, the TV just turns off?
This is happening on 2 TV's in the office. Both are LG WebOS TV LF 6350
SW Version: 04.05.25
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.