- 0
Asked by
Rafael Luciano,
-
Similar Topics
-
By JasonB
Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
By Horniak
BUG: Impossible to play an RTSP stream directly to LG WebOS.
According to LG it should work:
link hidden, please login to view "● Real-time Video Streaming
WebOS supports various IP video streaming protocols, including RTSP/RTP/HLS and UDP Multicast, for live streams. Its excellent capacity for content playback facilitates easy management of real-time video content."
------
After reading friggin everywhere, and on this forum, there is no easy way to do this without external products. I own 2 LG oleds, one 77" c1 and one 55" c4. And the c4 was bought with this usecase in mind.
So, how do I open an rtsp:// stream on WebOs?
Thanks
-
By CJ Catalano
Hi All, I just purchased a 75QNED85 and have a question about the ARC function. I have the tv hooked up to an older Denon AVR (2112ci). My cable box (FIOS) is connected to HDMI 1 on the TV. The Denon is connected from its HDMI Out (ARC) port to HDMI 3 on the TV (ARC/eARC). The tv has the ability to configure the Sound Out over HDMI to PCM, Auto or Pass-Through. If I select either Auto or Pass-Through the Denon sort of recognizes it as a Dolby Digital signal but just plays a sort of chirping/clicking sound. If I change the setting to PCM it works, but it only seems to be passing a 2.0 signal as the Denon reverts to a ProLogic surround mode. I didn't try connecting via the optical port because I already have something connected to the Denon's optical input. Anybody have experience with this? Should the PCM setting be able to output a full 5.1, 7.1 signal?
-
-
By RJ Fischer
New LG 55" C4, Magic Remote STB setup does not provide for Charter/Spectrum Arius STB model DCX3220? This is a current model STB and previous LG models did provide MR setup for this model.
-
-
Similar Tagged Content
-
- 4 answers
- 1,272 views
-
- 0 replies
- 409 views
-
- 1 answer
- 3,170 views
-
- 0 answers
- 4,857 views
-
Question
Rafael Luciano
Hi, I have a LG 47LB7000 with WebOS. This TV comes with universal remote feature. However this feature doesn't work on my STB (an Elsys ETRS35 or KAON NS 1030) with OI TV (a TV provider from Brazil). I've tested many manufacturers but no one works for me. My other TV (a Samsung TV) works perfectly with the STB (in my child room).
Anyone can figure out how can I solve this?
Sorry by the bad english.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.