- 0
Issue with Paramount PLus Freezing
-
Popular Now
-
Similar Topics
-
By orgullodemexico
I'm having an issue with my LG TV & LG Sounbar setup
LG UJ6200 TV software 6.10.55
LG soundbar 33217
ISSUE: All sound effects EXCEPT movie sound muted, requiring more volume to listen than MOVIE sound effect for live TV and Internet Streaming
TV AUDIO SETTINGS: Sound out ==> Audio Out (optical/HDMI ARC)
Digital Sound PCM
Simplink: ON
I unplugged the sound power, pressed the power button for 60 seconds ==> no effect
I pressed the volume down button on the sound bar while pressing sound effect on the remote for 60 seconds ==> No effect, did not get reset message.
-
By Webos-developer
Hi LG team,
We are facing playback issues on LG 2024 and 2025 tv models when we try to play AAC audio content. The content starts playing but after a few seconds it pauses. We have tried with WebOS native player as well as Shaka Player and the behavior is same. We can play the aac audio content on tv models older than 2024.
Tv model used:
LG -2025
Model no - 43UA83006LA/2025
Type- ultra HD/4kTv
LG webOS- (10.3.1)
-
By akhilesh malladi
hi, Friends,
i have finally fixed the HDMI ARC issue.
Apparently some people also had the same issue and couldnt figure out whats wrong.
After reading through AVSForums, I finally understood that LG had a bug in HDMI operation as well..
The problem happens when your TV is already sending sound through HDMI ARC to a AVR and you try to connect additional sources like dth or blueray player to additional HDMI ports of TV and AVR. Once you add additional sources, you might try to use LG's device connector setting to control the device and this is where HDMI ARC stops working.
Solution:
disconnect all hdmi ports of TV and AVR.
Full reset TV and AVR.
Only Connect HDMI ARC port of TV with HDMI ARC OUT of AVR. Enable ARC feature on both TV and AVR. Open LG TV internal app,
and check if sound is coming properly to AVR.
Now you Connect All additional sources to other HDMI ports of TV and nothing should be connected to AVR.
You may use LG device connector setting to configure the magic remote to control them.
MY current setup of TV:
HDMI 1: Airtel DTH.
HDMI 2: ARC connected to Denon AVR 1500H.
HDMI 3: ACT Television(Using this to play hotstar premium content as LG inbuilt APP is not playing it)
Good news:
LG magic remote can control all 3 devices seamlessly and thats a great ease for customers.
I shall appreciate LG for this.
-
By aglhunt
LG TV 65UP8000PUA
Using the Paramount+ App I continually get -3205
I saw a fix that suggested using an android device to start the episode and then continue watching on my TV. It works but is very tiresome.
This would seem to indicate that there an no WIFI issues connection or speed, Currently running at 700 Mbps
An alternate solution offered is to clear the App cache using Settings / All Settings / General / APP ... but APP is not offered as a selection
Any suggestions as to how I can clear an App Cache would be appreciated
-
By Lechat 34
Bonjour,
Depuis ce matin en Espagne sur ma télé LG OQEE ne fonctionne plus, j'ai un message d'erreur qui m'indique "Erreur interne , Un problème est survenu, un redémarrage de l'application est nécessaire.
J'ai redémarré plusieurs fois, supprimé l'application et réinstallé l'application mais toujours le même problème !
Par contre cela fonctionne très bien sur mes ordinateurs, les tablettes et les téléphones.
Une idée pour solutionner ce problème ?
Merci d'avance, bonne journée
-
Question
Phil7108
We recently subscribed to Paramount Plus to catch up on episodes we lost when our COX CONTOUR DVR died. Frequently when streaming an episode,the playback will suddenly freeze. If we try to go back, using the "undo" key, we can sometimes get the playback to resume, but it has rewound abp=out 10 minutes. After resuming playback, it will frequently freeze again. My wife is so frustrated, she wants to cancel Paramount. Any suggestions appreciated!
4 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.