- 0
LG CX, SONOS arc: PC audio is randomly recognize as WMA and randomly as Dolby Atmos
Asked by
Riccardo,
-
Popular Now
-
-
Similar Topics
-
By OLED65G56LS
LG OLED65G56LS – I want to turn off the commentator's audio during a football match but keep the stadium sound.
-
By stevef
Since my lg-oled65c9pla auto-updated to WebOS 5.5, there is a new bug.
The TV is connected to my Cambridge Audio Evo 75 amplifier over ARC - on powering the TV, it has always started up the amp, and switched it to use audio, instead of the appalling TV speakers. The whole setup has worked flawlessly for 5 years, but since WebOS 5.5, the amplifier starts, but is left in a muted state, and using the un-mute or volume controls on the TV remote makes no difference to turning on audio. The only way to get audio to play though my amp a speakers is to turn the amp's volume dial or press a volume button on the a amp's remote - this then unmutes the TV and audio is back.
There is no setting I can find in the TV that relates to whether the ARC channel starts muted or not...
No software has changed in my amp. This is an annoying new bug in the TV software, I assume down to some CEC changes.
-
By Webos-developer
Hi LG team,
We are facing playback issues on LG 2024 and 2025 tv models when we try to play AAC audio content. The content starts playing but after a few seconds it pauses. We have tried with WebOS native player as well as Shaka Player and the behavior is same. We can play the aac audio content on tv models older than 2024.
Tv model used:
LG -2025
Model no - 43UA83006LA/2025
Type- ultra HD/4kTv
LG webOS- (10.3.1)
-
By tazcox
hello
i have buy a 55UB850V , i'm really happy for the quality but during a tv show i can't change the audio language ..
on my la 690 i can choose the audio language with the menu Q-menu ..
i can't find this menu on the UB...
anyone could help me ?
-
By jikhead
I'm not getting any audio from the apps via the HDMI via ARC connection to my receiver. This occurred two weeks ago and was unable to resolve it, but ironically there was new firmware released that same day for my B6 (3/31/17) and this fixed the issue. However, now I again can't get it working after a TV reset and tinkering with the audio settings again. I tried to load the firmware again, but it appears this is not possible to forceable load the same firmware.
-
Question
Riccardo
Hello to everyone,
I am new to the forum. I wanted to ask whether I am alone with this problem or it is common.
My set up: PC-DolbAtmos, LG-CX, SONOS ARC (eARC).
I've notice the audio connection between the PC and LG+ARC was unstable. Finally I noticed LG-CX sometimes forward (passthrough) the good Dolby Atmos signal and some other times it passes a signal which is WMA (not supported by the sonos device).
PC is set to always send "Atmos", when WMA is sent, simply changing "passthrough->PCM->Passthrough" in the LG audio menu solves the problem.
Why is know that LG-CX randomly passes the good signal at times and at other times doesn't ?
Would you have any tricks to help out ? maybe force audio to be transcoded by the TV (possible?) to be alway DD+ ?
Thanks a lot for any kind of help and suggestions.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.