So the other day I started installing a new game on my Xbox, and turned off the TV, leaving the Xbox on. The next I was turning on the TV, and it's a black screen. Using the remote, I get a message saying that "Smart Services will soon be available", just before it reboots (shuts down and automatically turns on again). After that it's stuck in this loop until I remove the power cord.
The things I've tried so far:
Disconnect both HDM-ports and restart Disconnect power cord and re-enter while holding down the power button on the remote Holding down the power button on the remote for 4+ minutes Holding down the power button on the TV (beneath the logo) for 4+ minutes Disconnect power cord for >28 hours and reboot Removed batteries from remote control and reboot Inserted a USB-stick with latest firmware to the TV and rebooted Nothing of this has helped. Any more ideas?
By Sol Harold
i’ve got an OLED 55C1 with webOS 6.0 and a service remote in South America.
I’ve been able to find working area codes for almost all regions using the service remote based on previous posts and tables.
Of most use to me were:
Brazil: 26895 (local DTV transmission settings) /22800 (BR/US DTV transmission settings)
US: 1843 / 1793 / 22287
AU Australia: 767
JP Japan: 23439
I’ve also found working codes for China (CN), Taiwan (TW), Hog Kong (HK), Philippines (PH), Australia, NZ & South Asia incl. India (AJ), certain African and Middle Eastern countries (JA or JA ME IL regions: note Israel is not an option even though IL appears in the code) , Canada (CA), Mexico (MX), Panama and Central America (PA), Ecuador (EC), Colombia (CO), Peru (PE), Chile (CL), and Argentina (AR).
Notably absent were working codes for;
Russia and CIS countries (RU CIS)
Eastern Europe (ETC?)
Does anyone know the working area option service codes for these countries?
I am mostly interested in working IL and KR codes.
thank you so much!
My TV has stopped recognising the live TV signal from the aerial since the OS updated recently. The aerial works fine when plugged into other devices but when plugged into the TV it doesn’t recognise the signal for days on end. When this happens, it will no longer allow me to do a signal test via the settings (the option is greyed out). I’m guessing it’s either a) a problem with the input (hardware) or; b) a problem with the OS (software).
JioCinema has a good collection of movies and shows , it would be cool if we could atleast side load the app or it would be officially released .
Similar Tagged Content