- 0
Switch From App to Antenna TV program via remote control voice no longer working properly
Asked by
Paul Griffith,
-
Similar Topics
-
By crct
I have a 42 inch LG OLED evo AI C4 4K Smart TV 2024 with a USE6S soundbar connected via HDMI.
Up until a few days ago, the iPhone app was connected via WiFi. I could use it to control the sound effect.
The sound bar remote could also change the sound effect, and the volume with the volume control visible on the TV screen.
Now the iPhone app does not connect to the soundbar and the remote control doesn't appear to alter the volums: there's no on screen display.
And also, the TV WOWcast output is not 'sticky': that it to say I can select it, and it remains for a time, but drops.
-
By JasonB
Trying to programme my magic remote to control an Amlogic OTT, however keep getting a ‘temporary issue occurred’ when I try. I’ve been trying for over a week now, so this temporary issue isn’t so temporary!
-
By Venkata
Hello Team,
My newly purchased 75-Inch Class QNED 4K LED QNED85T series TV with webOS 24 has a setup box and soundbar connected via HDMI. It automatically returns to HDMI input when I move between home and any app (like YouTube, Prime, etc.). It appears to automatically detect and switch to the HDMI input always. The soundbar attached to the HDMI was disconnected if I turned off Simplink (HDMI-CEC). There doesn't seem to be a way to disable auto sensing option. It appears that LG TVs lack a function or problem.
I have a Hisense TV with the same setup, and it functions perfectly. I have no trouble switching between apps and controlling devices connected via HDMI.
-
By David Daul
My magic remote and my Roku remote stopped working for turning off power so I performed a factory reset after troubleshooting to get the remote working. I am now stuck at the 1st screen of the Factory Reset which says "Press the OK Button(wheel) on your remote." Well... this really stinks because the remote doesn't work!!! I have tried a USB mouse, a new magic remote, other LG Remotes with no luck. I have also tried using the button on the bottom of the tv. And, I contacted support which was just an exercise in redoing everything I had already tried... No Luck!!
This is a Nano Cell 55NANO81ANA which is basically just a big brick now since I cannot even use any of the inputs. Does anyone have a trick for getting past this initial screen???
Thanks for the help.
-
-
By Peter_T
LG Oled42c44LA; cable TV to CI+ module
Program guide works OK until ca. 17.30-18.00 . Then the guide only shows current programs. Inspecting later times is not possible. Only thing that helps is to unplug the TV and plug it in again. But the next day the problem is there again around the same time. Is this a problem of the LG TV? Is there a solution for this?
-
Question
Paul Griffith
When I try to go to a TV programme via the remote control voice option, the TV tries to look up the channel on the app I'm on, instead of going straight to the TV channel on the antenna. This used to work without any problems up until a couple of days ago. Any help appreciated.
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.