- 0
Problem with interlaced resolution
-
Similar Topics
-
By Brendanchatt
Hello all,
From what I can tell, this may not be supported anymore. I am on webOS TV Version 7.1.0-68 (mullet-maria).
I just purchased an OLED 42 inch C2. When I select Multiview, the two hdmi ports are not an available combination.
I have turned of CEC (now SIMPLINK) for both HDMI inputs as I read in a post from 2018.
Thank you,
Brendan
-
By Roop
I recently purchased a HU715QW LG Projector which came with software version 03.00.06, does this mean I am on WebOS 3.0, is there a way for me to get to 6.02 which seems to be the latest version of WebOS? Thanks for your help.
-
By Bevb
I have a NANO91ANA LG TV connected via HDMI to a Yamaha RX-V677 Receiver. Normally when I turn the TV on it also turns the receiver on and I can control volume via the LG remote, whether it is an app on the TV or from another device connected to my receiver (Apple TV or cable box). Now the receiver is not turning on and ARC audio is not working. I think there may have been a software update the other day, but I'm not sure. However, everything was working properly until last night. The last time this happened it seemed to correct itself (it seems to be kind of sporadic), but this time it did not. I do not know what to do to correct this, but it is a major pain as I'm now having to deal with 4 remotes, plus I can't get sound out of my surround speakers when using an app on the TV. Any suggestions would be appreciated.
-
By Koldolmen
When i start my tv it boots up at HDMI 2 ARC which is the last one used and the one I want to use (Sound bar/apple tv connected), but then the tv changes to HDMI 4 and I don't understand why because there's nothing connected to it. It does this every time. I start my tv via my apple tv remote. Is there a way to force HDMI 2? Set it as default?
-
By Mads
Hello friends
Has someone in this Forum had the same problem - and found a succesfuld solution?
Best/Mads
-
-
-
Similar Tagged Content
-
- 0 replies
- 850 views
-
- 0 answers
- 4,542 views
-
- 2 answers
- 11,328 views
-
Question
Jasmin Rašljanin
I recently bought a UHD tv 65UP75003. I'm not sure, but I think there was a problem after the software upgrade. The TV is connected via an HDMI cable to a DTV receiver that sends 1080i resolution and the problem is in the horizontal line that travels from top to bottom. The line is not visible at progressive resolution. What I did: Reset the TV, receiver, bought a new high speed HDMI cable ...
Please help and what to try next?
Link to comment
Share on other sites
Top Posters For This Question
1
Popular Days
Nov 23
1
Top Posters For This Question
Jasmin Rašljanin 1 post
Popular Days
Nov 23 2021
1 post
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.