-
Similar Topics
-
By Phaedrus
On an LG CX 55, two minutes into episode 4 -- "The Tomb" -- of the series Moon Knight on Disney+ there is a scene with statuettes in niches each lit by an oil lamp. As the flames flicker, dark blotches jump around some of the niche walls.
These are certainly unintended artifacts.
Can someone confirm wether this is a CX (only) issue?
-
By Vanilton Coelho
Hi people,
Recently bought one 49LF6350 and one 43LF6350 and the two models have the same problem, whenever I try to open an application, informs me that I have to update (required update, you must update this app to launch it. the update may cause data to be stored deleted.), and when I try to update, it gives an error message (application has not Been instaled. try again). It happens to apps also store to at new install. what may be occurring?
software version: 3:03:04
WebOS TV version: 2.0.2-3928 (behive-badlands)
thanks.
-
By Pat
Bought a new 65" Smart TV, all the preoaded apps You Tube, Netflix etc are restarting after couple of minutes with "this app will now restart to free up more memory" message.
-
By Jim Brown
I have a LG OLED C8 TV with a Soundbar and when connected to Optical the Volume Control is normal with a Percentage 0% to 100% but when connecting to HDMI ARC port like the Soundbar suggest to be connected it just show + or -, you don't have anyway of knowing what the volume is set to. I have tried two Soundbars a LG LAS551H that was connected via Optical and when connected to HDMI ARC it also does not show Volume Control. I have got a new Sonos Beam Gen 2 that is now connected to HDMI ARC port and sounds great but if I connect it to Optical it's much lower in volume but has the Volume indicator. Please advice.
I would like to suggest three enhancement request: 1. to show Volume Percentage on the HDMI ARC port. 2. Optical and HDMI ARC have the same output and 3. the Sonos be added to the Device list under Soundbars.
Thank you,
Jim Brown
-
By Jim Brown
I have a LG OLED C8 TV with a Soundbar and when connected to Optical the Volume Control is normal with a Percentage 0% to 100% but when connecting to HDMI ARC port like the Soundbar suggest to be connected it just show + or -, you don't have anyway of knowing what the volume is set to. I have tried two Soundbars a LG LAS551H that was connected via Optical and when connected to HDMI ARC it also does not show Volume Control. I have got a new Sonos Beam Gen 2 that is now connected to HDMI ARC port and sounds great but if I connect it to Optical it's much lower in volume but has the Volume indicator. Please advice.
I would like to suggest three enhancement request: 1. to show Volume Percentage on the HDMI ARC port. 2. Optical and HDMI ARC have the same output and 3. the Sonos be added to the Device list under Soundbars.
Thank you,
Jim Brown
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.