- 0
-
-
Similar Topics
-
By OliverRC
Up until a few days ago my TV and AVR have been working perfectly since I bought it.
Zero hassles with HDMI and connectivity.
Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
I’ve tried:
Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
Marantz SR5015 Nvidia Shield Pro PS5
The setup is the conventional AVR installation as shown in the attached file
Has anyone else experienced this?
Is it possible to revert the software update?
-
By next 0815
A satip / sat>ip / sat over ip client software or app available for a beamer with WebOS like LG Largo or the newly announced LG Andante would add significant value.
Networkcable and power thats all you Need to get acces to all chaines your satip / sat>ip / sat over ip Server provides
What is blocking to provide a little piece of Software?
-
By Maher1976
Hi
I have smart LG tv 2015 model 42LY760H.
I think I have WebOs-1 .
I am trying to find update to download it on USB stick but I couldn't find even on lg official website.
Do you have any useful information or link to help me.
Thank you
-
By Debojit Kundu
Hi I recently updated the software to 5.30 version, and after that I noticed a weird problem with video streaming, in general issue with internet bandwidth. Usually my b/w is ~35 mbps so that is sufficient for 4k streaming on youtube or netflix. The issue is after running for 10-15 mins if I pause the video or go backward the network speed is thrashing badly. For example when I check internet connection on netflix it shows ~30-35 mbps, but whne that problem occurs and I check the speed again I see the speed is dropped to <1mbps. Same with youtube, it can't load 4k videos anymore as the speed is ~1mbps. I can realize the problem as the thumbnails load very slow with scrolling. This problem does not get away unless I restart the TV or disconnect from wifi AP and connect back. The router always works fine I mean when I observe the problem on tv I can run videos on mobile seamlessly and see a speed of ~40 mbps on the same router. The router is kept next to the TV so I don't think it is some issue with wifi distance etc. I don't know what to do. I tried resetting but it removed all my app but it was actually not a so called "factory reset". So software version remained same. To rule out hardware problem I want to revert to previous version of the software but apparently I can't downgrade the software. Is there any other approach to load some previous version firmware?
-
-
By Alex
There's been a lot of frustration over the years since LG aquired webOS and moved it into all their TVs, specifically around software updates. After a year or so, updates are not always available, mostly due to model and hardware limitations. Now come teh 2024 webOS TVs and LG is promising to keep you updated for at least five years! That's quite a turnaround from years past..
The news is part of the recent 2024 QNED Announcement:
LG 2024 QNED TVs also elevate the home entertainment experience with versatile personalization and increased convenience. With the webOS Re:New program,* LG is offering an upgrade to the latest version of its webOS smart TV platform to give more smart TV owners the most up-to-date user experience for the next five years. This notable offer comes to LG QNED Mini LED 8K models launched in 2022 (QNED99 and QNED95 series) and will be extended to additional models in the QNED TV lineup worldwide in the future.
-
-
Question
steven_spk
I've been looking through the API docs and source code but haven't been able to find accessibility for pushing config files and software updates to a number of TVs within a network.
Also is there a way to alter setting within the hidden menu with the ares api?
I need to change certain setup config on a big number of TVs on the network. Is that doable?
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.