When using Sound bar via HDMI arc have a way to have output audio for Hearing aid accessories
-
Similar Topics
-
By John Bizeray
I recently updated the firmware on my LG43UH610V. Now I constantly get "Wired Lan cable disconnected" / "Wired network is connected" messages even while watching a video file from my NAS. The TV is connected and using the network while getting these messages. It has always been on a fixed IP address on the LAN.
-
By cb4332
Hi guys, I have an older received (Arcam AVR300) that only support optical input, so I was able to add it manually via Connected Devices, and can control the volume and mute, however I can't turn it off quickly (can only do it via the "..." button and selected sound bar and then power). This work, but is it possible to map this to lets say the top box on/off button or even some other button? Maybe even some cable I would but to make this work. The old remove is dead so I need a way out and the receiver is old and I don't want to keep it on always. Thanks
-
By Mark Tiede
So I got an Xbox One X which has games that display 4k. And also the YouTube app displays 4k videos. How do I know that I have everything set up correctly and the TV is ACTUALLY displaying 4k video mode?
Sometimes even HD looks really good and I haven't watched 4k stuff to know if I'm really seeing it.
It would be nice if there were an option in the TV for displaying the actual resolution in the corner or something. I tried to set things up through my Denon AVR X2000 receiver and the Xbox complained about the TV not being able to do 4k. I don't know if I had something set up wrong or not, so I just hooked the Xbox up to the TV in hdmi 1. And I think the Xbox THINKS it is now capable of at least SOME 4k, but it would be nice to verify that the TV is doing what I think it is doing.
Anybody know an app or something that would help?
oh, I DID see a "+HDR" on the screen for a moment at some point. Don't remember what triggered it nor how to get it to display it again.
-
By Adam Broda
Hello
I have 42B670V-ZA tv bought in 2014. This model has different numbers/letters depending from the distribution area. Mine is for Poland.
Software version is 05.05.70,
WebOS version is 1.4.0-2532 afro-ashley. This model was made with the intention of upgrading to WebOS 2 and so it was manufactured. In late 2014, once the tv was still on market, European and US (with a different name), LG Korea has announced that this model would not have upgrade. Nevertheless I think it STILL IS a way to make it higher or at least faster, as it was on a very beginning. Now it coughs after using 45 mins on Netflix or 30 mins on WWW app when watching film online. When instslling new app, it shows such data:
Version of the app i.e. 1.1.1
Date of last update of the app i.e. 20.04.2015
Size of the app i.e. 105 KB
Rating i.e. "everything" (???)
Internal memory i.e. 850MB/973MB
And this INTERNAL MEMORY REMAINS THE SAME 850MB
Does anybody know, how to do this either using
service mode or
Installing some software from a memory card
or in any other way? The problem is that the tv has not enough memory to operate apps. I cannot release the memory without loosing my settings. I live in Warsaw, Poland, but I have additional apps like HULU and Amazon Prime US which enables me watching US content (I pay for them in USD).
Uninstalling other useless apps didnt work. Now I have only system apps and 3 more like Netflix, HULU and Amazon. I cannot even install anything more. LG support told me to return to factory settings which wipes all memory out. I dont want to return to WebOS 1.0. I just want my tv to work faster BACK AGAIN and maybe to use some other apps which cannot be installed due to insufficient space on card/disc and to install some apps that are compatible with WebOS 2. (Now they are not apperaing neither in Polish LG store nor in US store, once I change the region to US/CANADA/MEXICO.
Thanks in advance!!!
-
By C C
[Feature-Request] Set power on to last HDMI input
Not sure if this feature request would be part of LG webOS or would require changes to some lower level control software for my TV.
But... It seems that every time I switch it on, it seemingly randomly selects a HDMI input, I mostly use the same HDMI input so I wanted to ask for a feature request in the next software update that makes the TV remember the last selected HDMI input so I don't have to keep manually selecting it.
In addition, maybe a second option in the TVs settings that can auto select the input based on there being an input signal or not, that might be useful for people that switch devices allot.
Thanks
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.