-
Similar Topics
-
By KevinH
I just got a new TV (43UN7000PUB) and can’t get HomeKit to work properly. It works fine when the TV is on but won’t work when the TV is off.
I have seen several threads on this and done some research but did not find a resolution.
I read several threads that blamed it on the Magic Remote and Bluetooth. This TV does not have the Magic Remote so I think that can be ruled out.
One thread pointed out that when the TV is off it loses it’s LAN connection and it’s WI-FI connection and said that could be the problem. I can confirm this is true with mine as well. This argument makes perfect sense to me as all connections would be lost when the TV is off.
If anyone can help I’d surely appreciate it.
One thread said the problem was fixed with a FW update. But that was with a different model and a different FW than mine. As I recall from memory it was something like FW xx.35.10 and it was a 55” or 65” TV. My firmware says it is current with version 3.21.36.
Maybe a moderator could confirm the firmware fix already exists for this issue. If so, could you please see that it gets pushed out to all HomeKit TVs instead of just that single model?
Thanks in advance for any help or comments.
-
By DaveM
Following a recent update my TV keeps powering off (going into standby) and then takes several minutes to turn back on.
I've been through all the troubleshooting steps including a full reset, unplugging all cables etc.
I ordinarily have 3 devices connected to the TV - a Sony Amp (sky, pc, firestick), a nintendo switch and a PS5. The latter two using eARC for audio. It has been set up this way since January with no changes or any issues at all.
Recently a software update was pushed out and the issue first started within minutes afterwards and has since it has been a nightmare. The TV will often go into standby after a few minutes use and will not turn back on. Even properly pulling the power makes no difference. The device will go to turn on and then click back into standby with the red light lit. There has since been another update which I thought may be a fix for the issue but wasn't.
I did find that pulling all the HDMI cables and turning it back on seemed to help it turn on but recently that hasn't been helping either. The only "fix" is to wait about ten minutes where it will then usually turn on. IF the device stays on for more than 10 minutes it largely seems to then stay on without issue.
I have tried doing various things like disabling CEC control incase something was sending a bad HDMI signal but that hasn't helped and obviously causes issues for the eARC devices.
Any ideas of anything to try, whether itmight be a s/w issue or is just a hardware failure? Thanks
-
By Satya_
Software version 05.30.10 default web browser just updated and the address bar appear on the top of the screen which bother me a lot while playing a video please add a Full screen option to it
-
By Adithya
I don't find any latest updates for 55UH850T this model. Most of the applications says that WebOS 3.5 or more is required. This model TV is with 3.4 WebOS version.
Please let me know in case if anyone has any information on this.
-
By ljjones
Now I can't figure out how to re-order the bookmarks. In the previous browser, you could just highlight a bookmark and then drag it up and down the list. Does anyone know how to manage the bookmarks now?
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.