- 0
-
Similar Topics
-
By crct
I have a 42 inch LG OLED evo AI C4 4K Smart TV 2024 with a USE6S soundbar connected via HDMI.
Up until a few days ago, the iPhone app was connected via WiFi. I could use it to control the sound effect.
The sound bar remote could also change the sound effect, and the volume with the volume control visible on the TV screen.
Now the iPhone app does not connect to the soundbar and the remote control doesn't appear to alter the volums: there's no on screen display.
And also, the TV WOWcast output is not 'sticky': that it to say I can select it, and it remains for a time, but drops.
-
By hollean
I've just purchased an OLED48 C44 LA which comes with a US 60T soundbar. I've connected the soundbar to the HDMI earc socket. Because my hearing isn't too good I'd like to also have some heaphones plugged into the 3.5mm socket so that both the hdmi earc and 3.5mm socket have sound simultaneously. I've been into accessablity menu and the listen together option doesn't appear to offer both hdmiearc and 3.5 mm simultaneously. Has anyone found a solution to this problem?
just to be clear, There is a setting which permits TV speakers plus wired external headphones. I just haven't found a setting which allows HDMI earc soundbar plus wired headphones.
-
By DeeDeee
Wondering if anyone has any knowledge of, or opinions about, the best soundbar to go with a 55" C4, fir clear dialogue?
-
By JamesH
I output the sound from my LG 75UJ657A to external speakers through a bluetooth connection, but it doesn't automatically connect to the bluetooth device when I turn the TV on. Whenever I cycle the TV off and, then, back on, the TV asks if I want to connect to the bluetooth device, and I have to select "yes" with the remote. My smart phone automatically connects to all the bluetooth devices I've set it up with. When I start my car, my phone connects automatically to the car stereo/phone system, and it does the same with other bluetooth speakers I have. This is what I want my TV to do.
How do I get my LG 75UJ657A to automatically connect to the bluetooth device I've set up with it?
-
-
By Regis Wheeler
Apparently, the LG model OLED55CSPUA has an issue with the external device power on/off control. I can configure the IR Bose soundbar well enough, as setup sequence tests it good to control soundbar power. but after exiting the setup, when i press the external device power button on the remote, the TV just wants to cycle through the setup again. It doesn't toggle soundbar power, just cycles back to the setup. i have tried factory settings reset and verified that there are no other devices on the TV.
-
Question
David38
Have got the Bluetooth set up ok, was a struggle as instructions only cover Optical.
Problem is TV does not remember it has to use the soundbar by bluetooth when switched on it is back to internal speakers then I have to go back into menu and set it up again.
First time with bluetooth and surprised it so hard as have been led to believe it is an easy system.
Thanks
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.