Own an LG TV or webOS device? Join our Forum!
Register now to gain access to our webOS user support forum. Once registered and logged in, you will be able to post a user to user support request topic to this site or reply to existing topics posted by other users. You can also take part in our other webOS user forums. You'll be able to customize your profile, receive reputation points, while also communicating with other members via your own private inbox, plus much more!
Hi all - just purchased a new OLED48CX6LB and looking to use the magic remote to control my sky plus box. I’ve managed to figure out most controls with the exception of being able to set a programme to record from the planner (the equivalent of pressing R on the sky remote)
is there any way to do this ?
thanks in advance for any help
my original magic remote is on its very last half-a-leg. i ordered what was supposed to be a suitable replacement as i was informed that my particular model remote had been discontinued. the new remote is an LG AN-MR700 and it will not register to my LG webOS tv. i can control power and volume only. pressing the ok wheel attempts to register but comes back as fail after about 30 seconds.
Keep getting this message on the top right hand corner of the TV screen
"Your Magic Remote Signal Is Unstable"
There is a ton of lag, almost to the point where the remote becomes unusable, then it snaps out of it and works fine for 2-5 seconds then the lag comes back.
Other support forums suggested to hold down the back arrow and the home button simultaneously until the power button on the remote blinks. I've done this, and it re-registers the magic remote, but it does not fix the lag.
I have also reset the TV back to initial settings, but still the lag persists.
Anything else I can try?
My LG TV 32LB580V don't operate with remote again, I disabled (IR operation) in service menu mistakenly, pls can you help meBy suli
My LG TV 32LB580V don't operate with remote again, I disabled (IR operation) in service menu mistakenly, I have tried all my efforts to reset, tried to update firmware, it say am using the latest I tried reset but reset not highlight pls can you help me