LGWEBOS signange - Application gets hung and issue with regional news
-
Popular Now
-
-
Similar Topics
-
By SNiPpy YiPpy
Hello all,
I believe this problem started after i accidently started and immediately cancelled the download of a app. After this I am unable to install or update any app evem after resetting to initial settings.
This should be the exact problem found here https://www.lgwebos.com/topic/1918-because-i-can however the solution seems to require a new update. Help?
-
By RCMiller
Greetings,
I'm hoping someone can assist with a problem we're experiencing while running a Next.js based web application on WebOS.
Our Configuration:
Display: 43UM5N-E UHD Signage Display (43" LCD)
WebOS version: 6.0.0-124 (libertyspikes-lager)
Next.js version: 16.0.3
React version: 19.2.0
We have built a web application using Next.js and React. It is hosted on an IIS server running on our local network. The display is connected to the same network and we have verified connectivity with the web server. Our application is not a native WebOS app, but rather, we are using the Play via URL option to display the web site when the display boots up.
Attached is an image of the errors captured while running in the WebOS 6.0 simulator. These errors happen immediately after the application starts.
Based on our research, the embedded version of Node.js on this display is 8.12.0. On newer versions of the simulator (v22 and above), the application loads fine and no errors occur. It seems there are JS incompatibilities between the newer Next.js framework and the version of JS build into this display.
Questions:
1. Can the embedded JS version of the display be upgraded, and if so, how?
2. Is there any other possible workaround to get this application to load? It runs fine on regular browsers and reverting back to an older version of Next.js or re-writing in plain JS is not an option for us.
Any suggestions or help is appreciated!
Thank you,
Bob Miller
-
By hjetschko
Hi, I have a feature request for the sound out setting. I often connect my Bluetooth headphones to the TV. We don't use the internal speaker of the TV, we use the optical sound out setting whenever I don't use Bluetooth. It would make our lives a lot easier if the TV can remember the last sound out setting before connecting to Bluetooth and default back to this setting when the Bluetooth device gets disconnected. At the moment, each time I disconnect the headphones I have to go back into settings and change the sound out setting from internal speaker to optical again.
Thanks and regards
Hubert
-
By akhilesh malladi
hi, Friends,
i have finally fixed the HDMI ARC issue.
Apparently some people also had the same issue and couldnt figure out whats wrong.
After reading through AVSForums, I finally understood that LG had a bug in HDMI operation as well..
The problem happens when your TV is already sending sound through HDMI ARC to a AVR and you try to connect additional sources like dth or blueray player to additional HDMI ports of TV and AVR. Once you add additional sources, you might try to use LG's device connector setting to control the device and this is where HDMI ARC stops working.
Solution:
disconnect all hdmi ports of TV and AVR.
Full reset TV and AVR.
Only Connect HDMI ARC port of TV with HDMI ARC OUT of AVR. Enable ARC feature on both TV and AVR. Open LG TV internal app,
and check if sound is coming properly to AVR.
Now you Connect All additional sources to other HDMI ports of TV and nothing should be connected to AVR.
You may use LG device connector setting to configure the magic remote to control them.
MY current setup of TV:
HDMI 1: Airtel DTH.
HDMI 2: ARC connected to Denon AVR 1500H.
HDMI 3: ACT Television(Using this to play hotstar premium content as LG inbuilt APP is not playing it)
Good news:
LG magic remote can control all 3 devices seamlessly and thats a great ease for customers.
I shall appreciate LG for this.
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.