By Sol Harold
i’ve got an OLED 55C1 with webOS 6.0 and a service remote in South America.
I’ve been able to find working area codes for almost all regions using the service remote based on previous posts and tables.
Of most use to me were:
Brazil: 26895 (local DTV transmission settings) /22800 (BR/US DTV transmission settings)
US: 1843 / 1793 / 22287
AU Australia: 767
JP Japan: 23439
I’ve also found working codes for China (CN), Taiwan (TW), Hog Kong (HK), Philippines (PH), Australia, NZ & South Asia incl. India (AJ), certain African and Middle Eastern countries (JA or JA ME IL regions: note Israel is not an option even though IL appears in the code) , Canada (CA), Mexico (MX), Panama and Central America (PA), Ecuador (EC), Colombia (CO), Peru (PE), Chile (CL), and Argentina (AR).
Notably absent were working codes for;
Russia and CIS countries (RU CIS)
Eastern Europe (ETC?)
Does anyone know the working area option service codes for these countries?
I am mostly interested in working IL and KR codes.
thank you so much!
My TV has stopped recognising the live TV signal from the aerial since the OS updated recently. The aerial works fine when plugged into other devices but when plugged into the TV it doesn’t recognise the signal for days on end. When this happens, it will no longer allow me to do a signal test via the settings (the option is greyed out). I’m guessing it’s either a) a problem with the input (hardware) or; b) a problem with the OS (software).
By Ajay Lele
I shifted to India from UAE with my 55SM9000PVA LG TV. Since it is a TV for the middle east, I can not change the region to India. Therefore I can not log in to my LG account and have apps from the LG content store of India. Ok, so I thought I should be able to use my account in UAE and use the apps which I used in UAE. Now these apps say the IP address is not from the region, so can't run those apps. So I am stuck up with an expensive smart TV without smartness. No service center, neither LG India have any answers to it. I hate using set top boxes please help.
Just purchased this and the set up is driving me nuts. I have a Sony reciever that I use for my audio out as well as HDMI device switching. The output of the reciever is going to HDMI 1. The TV audio out is set to HDMI (ARC) device. When watching devices directly connected to the reciever (cable box, roku, DVD, Tivo), audio out is fine. If I try switching to the smart menu or the antenna, there is no audio going from the TV back to the reciever. I also have a Roku I can use for streaming, but not for OTA. Should I just route everything directly into the TV, and use the optical out to get sound to the reciever? Also since setting up the TV and remote there is strange interaction btween the TV and the reciever. I noticed that my cable box, dvd, and roku all show up devices attached to HDMI 1, and clicking on that device will change the input on the reciever, but I have no control over the reciever from the LG remote, volume and muting buttons have no effect. Also there soesn't seem to be anyway to control my Fios cable box, a Motorola HD QIp 7100-1. I have the IR blaster sitting right next to it
When I open the DSTV Now app on my lg tv I get the error “We’re sorry Something went wrong. Please try again.”
I have re installed the app, checked for firmware updates and even reset TV but the error keeps on appearing.
Any suggestions on how to fix this? Is it a tv issue or is it the app which is faulty?