- 1
-
-
Similar Topics
-
By OliverRC
Up until a few days ago my TV and AVR have been working perfectly since I bought it.
Zero hassles with HDMI and connectivity.
Then I was prompted to update to the latest software version which I did and now often when I switch HDMI (running on 1) it picks up the device name, CEC works but I get “No Signal”… and then nothing.
Just stays on “No Signal”. It is almost as if some HDMI handshake breaks and now the driver is in a broken state.
I’ve found that if I hard power off and power on the device sometimes works but I don’t want to do that every time especially since it’s hard to get to the power.
This really strikes me as a software issue with the latest update as absolutely nothing else has changed in my setup.
I’ve tried:
Different HDMI cables (high quality) Deep colour settings Reset the TV to factory default Different HDMI ports TV
Model: OLED65G26LA / OLED65G26LA.HFBQLWK WebOS TV Version: 8.3.0.2301 Software Version: 13.30.56 AVR & Devices
Marantz SR5015 Nvidia Shield Pro PS5
The setup is the conventional AVR installation as shown in the attached file
Has anyone else experienced this?
Is it possible to revert the software update?
-
By dolbnya
I have a mediaplayer connected to my TV OLED55C6V through HDMI. For every video playback the player tries to select an output HDMI signal format automatically depending on both video framerate/resolution and framerate/resolution supported by the connected TV to show the video as close to original as possible with the TV without any scaling. And here I have a problem: the maximum resolution the player selects is 1080p despite of the videofile has resolution 4k and the TV supports playback of the input signal up to 4K60p. I can change the output signal resolution on the player manually after blayback starting and it works, but it's not convenient. As far as I know the only way of getting information about videosignal format supported by TV for the player is EDID on HDMI channel. So is it possible to fix the issue? Maybe some hidden setting in TV could change the version of EDID?
-
By Maher1976
Hi
I have smart LG tv 2015 model 42LY760H.
I think I have WebOs-1 .
I am trying to find update to download it on USB stick but I couldn't find even on lg official website.
Do you have any useful information or link to help me.
Thank you
-
By Debojit Kundu
Hi I recently updated the software to 5.30 version, and after that I noticed a weird problem with video streaming, in general issue with internet bandwidth. Usually my b/w is ~35 mbps so that is sufficient for 4k streaming on youtube or netflix. The issue is after running for 10-15 mins if I pause the video or go backward the network speed is thrashing badly. For example when I check internet connection on netflix it shows ~30-35 mbps, but whne that problem occurs and I check the speed again I see the speed is dropped to <1mbps. Same with youtube, it can't load 4k videos anymore as the speed is ~1mbps. I can realize the problem as the thumbnails load very slow with scrolling. This problem does not get away unless I restart the TV or disconnect from wifi AP and connect back. The router always works fine I mean when I observe the problem on tv I can run videos on mobile seamlessly and see a speed of ~40 mbps on the same router. The router is kept next to the TV so I don't think it is some issue with wifi distance etc. I don't know what to do. I tried resetting but it removed all my app but it was actually not a so called "factory reset". So software version remained same. To rule out hardware problem I want to revert to previous version of the software but apparently I can't downgrade the software. Is there any other approach to load some previous version firmware?
-
-
By Nick Payne
Since the latest update to the Binge app on my LG G1 OLED, whenever I try to watch any program on Binge, about every ten minutes or so the app puts up a message on screen saying that it needs to restart to recover memory, and then restarts. And when I go back to the program, the app doesn't remember how much of the program has already been viewed, and starts again from the beginning - I have to fast forward through it to get to the correct point.
None of the other streaming apps I use on the TV - Netflix, Prime Video, Stan, Apple TV - have any such problem, and if I switch to viewing using Chromecast with Google TV, which has the Android Binge app installed on it, I can stream programs from Binge without any such problem.
-
-
Question
Sam Hobbs
What is software version 04.25.70?
We have an 55EF9500 TV. Today we got an update for it, from 04.25.40 (I think) to 04.25.70. Apparently that does not correspond to a WebOS version but I assume it includes a newer version of WebOS. The important thing is, where do I look to see what the new features are?
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.