Join Today, It's Simple and FREE!
Register now to gain access to our webOS user support forum. Once registered and logged in, you will be able to post a user to user support request topic to this site or reply to existing topics posted by other users. You can also take part in our other webOS user forums. You'll be able to customize your profile, receive reputation points, while also communicating with other members via your own private inbox, plus much more!
I have the 2016 LG OLED65E6P purchased 2/19/2017 with the "magic remote" and recently, the remote control has become unreliable. It worked perfectly until a few weeks ago and I'm not sure what changed. The remote seems to work properly when the TV is first turned on, but later, I have to press a button repeatedly to get any effect. It's not bad buttons, it's like the buttons only send the signal to the TV intermittently. The red light at the top of the remote sometimes flashes red, sometimes goes solid red for a few seconds, and sometimes does nothing when I press the button (I couldn't find a description of what the light does). It's very frustrating.
I mostly make due by repeatedly pressing the button that turns on the teardrop cursor -- after maybe 10 times it'll come on, and then I can use the cursor to operate the TV until it times out. So that works, but it's not a good solution because it's hard to get the cursor turned on.
I put in fresh batteries several times to see if that's the problem -- it made no difference. Plus the cursor works fine, when I can get it turned on.
I was also hopeful that a firmware update caused this problem and it will be resolved.
The remote doesn't seem to require line-of-sight to work. Does the remote use bluetooth or WiFi? I sometimes use Bluetooth headphones with the TV and those work fine.
Has anyone else had this problem with the remote -- and if so, how did you solve it?
(I do have an extended warranty so in theory I can get a replacement remote -- but I'd rather not spend an hour on the phone if this is a common problem.)
So, it's the year 2018 and all the documentation I have found online says that LG TV's USB storage are limited to a max capacity of 2TB... nowadays that's considered rather small in terms of PVR and play backing of HDR 10bit content.
I've ordered a the LG 49sj800v which is due to be delivered in the next couple of weeks so I am in the process of preparing the hard drive ready for it, which I have a WD Red 6TB however after reading it seems to be limited to 2TB?! which surprises me because the TV even has a USB 3.0 port.
It is from my understanding that FAT32 is limited to 2TB and NTFS is limited to 16TB which brings me to my question(s):
Does the 2TB limitation still apply in WebOS 3.5? if the limitation does still apply is the limitation caused by Hardware or Software? If the limiation does still apply can you use multiple partitions or is the limitation the entire drive?
PS. I plan to use NTFS.
By Bernd Böhm
I am looking for a way to make my SanDisk 128GB USB3 stick work for "live playback" aka time machine. I have formatted the stick with the HP USB Tool (quick format in Fat32) but the TV refuses to use it for TimeShift recording. Regular recordings do work however.
Is there any other way to format the stick, or is the stick too big?